T A B L E O F C O N T E N T S GET STARTED What’s in the box Overview Charging Basic operations Display Wearing PAIRING Pairing Update ACTIVITY TRACKING & SPORT MODES Activity Heart rate Sleep CONNECTED FEATURES Reminders Notification Weather...
View ZeTrack battery level at any time. From the home screen, the battery level icon is in the top right corner. A fully charged ZeTrack has a battery life of 5 days. Please note that battery life depends on usage and the features you enable.
To select one of the 3 watch faces available, simply long press on the active one to toggle to the next one and so on until you find your preferred watch face To ensure ZeTrack is responding accurately to your taps, we recommend using your fingertip and not your nail.
5 . DISPLAYS 00:00 °C 8000 STEPS °C HOURS 25° °C KCAL HOME ACTIVITY WEATHER NOTIFICATIONS HEART SLEEP SCREEN RESUME RATE APPS STOPWATCH FIND SETTINGS WRIST SOUND MY PHONE FLICK Shake your wrist to take a picture BRIGHTNESS WATCH CAMERA INCOMING INACTIVITY REMINDER...
Page 7
6 . WEARING I DAILY WEAR For all-day wear, we recommend you to wear ZeTrack on your non dominant hand above your wrist bone. A wristwatch should not be worn too tightly. If the watch leaves an imprint on your wrist, it means that its too tight and it should be loosened.
Page 8
Enable Bluetooth on your mobile device. Open the MyKronoz App on your mobile device. Sign up if you are a new member or login with your existing account. After entering your personal information, tap Select and pair your device. Make sure ZeTrack is nearby, select ZeTrack model and choose your device.
Page 9
MyKronoz will provide regular firmware updates which you will need to install in order to access our latest upgrades and features for your watch. With ZeTrack, all these updates need to be done by OTA (Over The Air) and through the mobile app.
Page 10
To sync your data manually, slide your finger down the screen. ZeTrack has the ability to store up to 5 days of your activity data. Then, you will have to synchronize your ZeTrack with your mobile app in order to avoid loss of data.
Page 11
Once activated, two green LED lights will start flashing on the back of the device. Setting automatic HR monitoring on a very regular basis will impact the battery life. 1 1 . SLEEP ZeTrack tracks the hours slept and the quality of your sleep (light sleep, deep sleep, awake times). ENABLE PRESET SLEEP MODE Open the MyKronoz App >...
Page 12
For each alarm, ZeTrack will vibrate and ring continuously for 1 minute. You can snooze wake up alarms several times. Snooze length can be set in the advanced settings from the mobile app.
Page 13
1 4 . WEATHER To check the current weather, go to the Weather interface on your ZeTrack. By default, the weather screen shows your current location. To change the temperature unit or set your location °C manually, go to the settings of the MyKronoz App >...
Page 14
> Select Camera > Move your wrist to release the camera shutter. As soon as you open the camera from the MyKronoz App, a message will pop up on the ZeTrack screen to confirm that the Shake feature is enabled. Just shake your wrist to launch the counter and your wrist take a successful photo.
To quit the Settings menu, access to the exit door interface and long press the Navigation button. You can also find other settings such as do not disturb mode, inactivity alert and time format settings from the MyKronoz App. - 15 -...
Page 16
UNPAIR If you want to pair your ZeTrack with another smartphone, pair another MyKronoz device, give it to another person or return it, go to the MyKronoz App > Settings menu > Click on Paired watches > Click on Unpair.
2 0 . TECH SPECS Dimensions 41 x 20 x 10,6 mm Watch band size 16 mm (width) Weight 20 gr Display size and resolution IPS-LCD 0.96” / 128 x 64 px Material Polycarbonate, aluminium, silicone Battery type Lithium polymer 90 mAh Battery life Up to 5 days Connectivity...
Page 18
Connecting the built-in USB port improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty. Unplug ZeTrack when it is fully charged. This product is not a medical device and should not be used to diagnose or treat any medical condition.
Before using the device, read these instructions carefully. • ZeTrack has built-in batteries. Do not disassemble the battery on your own. KRONOZ LLC is not responsible for any damage or personal injury caused by the removal of the battery or any component.
Page 20
REGULARY NOTICE FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. CAUTIONS Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Page 21
ACCESS TO THE REQUIRED INFORMATION ON THE E-LABEL Users can access the E-Label screen on ZeTrack by going to Settings > General > Regulatory. No special access codes or permissions are required to go through the above steps beyond ente- ring a user-defined password to protect against unauthorized access to the device.
Page 22
DISPOSAL AND RECYCLING INFORMATION After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies : electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic device at the end of their service lives to the public collecting points set up for this purpose or point of sale.
Page 23
J O I N U S M Y K R O N O Z m y k r o n o z . c o m...
Need help?
Do you have a question about the ZeTrack and is the answer not in the manual?
Questions and answers