Table of Contents
Advertisement
4
9.
After the USB driver has been installed, click Finish.
Immediately after you click Finish, the Found New Hardware Wizard will
close and then automatically restart, prompting you to repeat the USB driver
installation. This occurs because Windows requires a second trip through
the installation routine to install and configure a virtual COM port for use by
NOTE
the RFID USB device.
10. Repeat Steps 5-9 to install the virtual COM port and complete the installation of the
RFID USB driver.
Figure 32 - Virtual COM Port USB Driver Installation Complete
33
Figure 31 - USB Driver Installation Complete
CONFIGURATION METHODS
Advertisement
Table of Contents
