Table of Contents
Advertisement
Quick Links
160304PSL/R, 160304PSML/R, 260304PSL/R, 260304PSML/R • Fax on Demand # 9034
Read and follow all instructions prior to installing your Aquatic Bath fixture. Save these instructions for future reference. Failure to comply with these
instructions may invalidate your warranty. For questions concerning installation and maintenance of your Aquatic Bath shower or tub/shower,
contact Technical Services at 800-945-2186.
Tools Needed
3/16"
Drill Bit
Phillips Screw Bit
Hole Saw
Items Included
or
Included – Shower or Tub-Shower
Aquatic Bath • 8101 E. Kaiser Blvd., Anaheim, CA • (800) 945-2726 • www.aquaticbath.com
Installation Data
+
=
— 1 —
Advertisement
Table of Contents
Related Manuals for Aquatic 160304PSL/R
Summary of Contents for Aquatic 160304PSL/R
- Page 1 160304PSL/R, 160304PSML/R, 260304PSL/R, 260304PSML/R • Fax on Demand # 9034 Read and follow all instructions prior to installing your Aquatic Bath fixture. Save these instructions for future reference. Failure to comply with these instructions may invalidate your warranty. For questions concerning installation and maintenance of your Aquatic Bath shower or tub/shower, contact Technical Services at 800-945-2186.
-
Page 2: Installation Data
NOTICE: Please inspect the unit thoroughly before installation to make sure it has not been damaged during transportation. Under no circumstances should a damaged unit be installed. Neither Aquatic Bath nor the distributor will be responsible for removal or reinstallation costs should a replacement be necessary due to installation of a damaged unit. -
Page 3: Pre-Installation Instructions
Level and mark all sides. Front apron should be firmly on the floor. Lift and place the back wall. NOTE: If unit is not level, the joints and seams will not align properly. Aquatic Bath • 8101 E. Kaiser Blvd., Anaheim, CA • (800) 945-2726 • www.aquaticbath.com — 3 —... - Page 4 Using a hole saw (fine tooth or abrasive grit cutting edge), make necessary openings for filler and valves, drilling from inside (smooth side) out. Aquatic Bath • 8101 E. Kaiser Blvd., Anaheim, CA • (800) 945-2726 • www.aquaticbath.com — 4 —...
-
Page 5: Installation Instructions
Pre-drill both (vertical) side flanges and fasten to side studs 8” (200mm) on center. The unit must be set level. Apron should be firmly on the floor. Place cardboard to protect finish. Aquatic Bath • 8101 E. Kaiser Blvd., Anaheim, CA • (800) 945-2726 • www.aquaticbath.com — 5 —... - Page 6 23 23 22 22 Apply silicone along horizontal and inside vertical edge. Check for level. Shim if necessary. Slide side wall into position. Aquatic Bath • 8101 E. Kaiser Blvd., Anaheim, CA • (800) 945-2726 • www.aquaticbath.com — 6 —...
- Page 7 Humidity affects the curing process and different geographical areas experience varying degrees of humidity. Refer to silicone manufacturer’s instructions for additional information related to curing times. Aquatic Bath • 8101 E. Kaiser Blvd., Anaheim, CA • (800) 945-2726 • www.aquaticbath.com — 7 —...
-
Page 8: User Maintenance Instructions
NOT WAX standing surfaces of the unit bottom (this includes textured, slip resistant standing surfaces), which could result in greater risk of slipping and personal injury. Aquatic Bath • 8101 E. Kaiser Blvd., Anaheim, CA • (800) 945-2726 • www.aquaticbath.com — 8 —...