Changing The Door Hinging - Miele K 12012 S-2 Operating And Installation Instructions

Changing the door hinging

The refrigeration appliance is supplied
with hinges on the right. If left-hand
hinging is required, the hinges must be
changed.
 Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
If a door seal is damaged the appli-
ance door will not close properly and
cooling performance will be reduced.
As a result, condensate will build up
in the interior cabinet and this can
cause a build-up of ice.
Do not damage the door seal.
 Close the appliance door.
 Unscrew the bottom hinge
bracket , and take it off.
 Take the appliance door off down-
wards.
 Pull the hinge pin  out of the hinge
bracket , and screw it into the
second hole in the hinge bracket.
(The hinge pin can be removed and
screwed back in using the hexagon
key supplied.)
 Remove cover  and use it to cover
the empty holes on the opposite side.
 Unscrew the upper hinge pin  with
the hexagon key supplied and refit it
on the opposite side. Don't forget to
use the washer.
Installation
51