Adjusting The Interior Fittings; Moving The Shelves; Split Shelf; Adjusting The Door/Bottle Shelf - Miele K 12012 S-2 Operating And Installation Instructions

Adjusting the interior fittings

Moving the shelves

Stoppers prevent the shelves from be-
ing dislodged by mistake.
 The shelves can be adjusted accord-
ing to the height of the refrigerated
goods:
1. Lift the shelf up slightly at the front.
2. Pull it forwards a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to pre-
vent food from touching the back of
the appliance and freezing to it.
26

Split shelf

(depending on model)
In order to accommodate tall items in
the appliance, such as tall bottles or
containers, one of the shelves is di-
vided. The front section can be pushed
carefully under the rear section.
 Push the rear half of the glass shelf
slightly upwards.
 With the rear half pushed up, lift the
front half of the glass shelf up slightly
at the front, then slide it carefully un-
derneath the rear half.

Adjusting the door/bottle shelf

Only move door/bottle shelves when
they are empty.
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
 Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.