Basic Phone Operation; Turning The Phone On And Off; Signal Strength; Power Save Mode - LG RD2230 User Manaul

Table of Contents

Basic Phone Operation

Turning the Phone On

Install a charged battery pack or connect the phone to an exter-

nal power source such as the cigarette lighter charger or car kit.

2) Hold down the Key

tor light (LED) at the top of the phone flashes.

Note As any other communication device, avoid any unnecessary

contact with the antenna while your phone is turned on.

Call quality is always best when the antenna is fully raised. If

you're inside a building, being near a window may give you bet-

ter reception.You can see the strength of your signal by the sig-

nal indicator (

When the phone is in an area without service for about 15

minutes, it stops searching for service and enters into the

Power Save Mode. When your phone activates this feature,

Power Save is displayed on your screen. The phone automat-

ically checks for service periodically or you can check manual-

ly by pressing any key.

RD2230

for 2 seconds until the red indica-

) on your phone's display screen.

Table of Contents