1. Manuals
  2. Brands
  3. Nipson Manuals
  4. Printer
  5. VaryPress 200-10
  6. Manual

Nipson VaryPress 200-10 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MAGNETIC PRINTER
VARYPRESS 200
Site preparation guide
22 A1 13NS REV5

Advertisement

Table of Contents
loading

Related Manuals for Nipson VaryPress 200-10

Summary of Contents for Nipson VaryPress 200-10

  • Page 1 MAGNETIC PRINTER VARYPRESS 200 Site preparation guide 22 A1 13NS REV5...
  • Page 3 Update with pressure and ground loading/unit added. 22 A1 13NS REV5 NIPSON SAS 28, rue E. Thierry-Mieg - BP 257 - 90005 Belfort Cedex - France Tel.: +33 (0)3 84 54 50 00 - Fax: +33 (0)3 84 54 52 18 http:/www.nipson.com - e-mail: info@nipson.com...
  • Page 4 A sheet on which to write your remarks is provided at the end of this manual. This document is for information purposes only. NIPSON cannot be held responsible for any damage caused by applying instructions contained within it. Corrections or modifications to the content of this document may be made without notice;...

  • Page 5: Table Of Contents

    Site preparation manual VARYPRESS 200 Table of contents GENERALITIES ............. . 1-1 CHARACTERISTICS OF THE PRINTER .
  • Page 6 Site preparation manual VARYPRESS 200 Table of contents 2.3.10 U.P.S............... 2-30 REMOTE MAINTENANCE.
  • Page 7 Site preparation manual VARYPRESS 200 Table of contents TIMINGS..............3-12 3.6.1 Timing of the printer speed change .
  • Page 8 Site preparation manual VARYPRESS 200 Table of contents Return to Start...

  • Page 9: Generalities

    VARYPRESS 200 Generalities CHARACTERISTICS OF THE PRINTER The NIPSON printer is a non impact printer which uses a magnetographic printing process. It is a page printer accepting continuous fanfold paper. The VaryPress 200 printer is available in 3 speed models.

  • Page 10: Machine Packing

    64 to 160 g/m fanfold, 64 to 90 g/m these ranges can be increased from 40 to 250 g/m2 after tests at NIPSON Resolution: 600 DPI : 600 x 600 dots/square inch (555 dots/mm 300 DPI : 300 x 300 dots/square inch (140 dots/mm Printing orientation: 0º, 90º, 180º...

  • Page 11: Temperature And Humidity Requirements

    Site preparation manual VARYPRESS 200 TEMPERATURE AND HUMIDITY REQUIREMENTS The conditions described here correspond to the current printers which are delivered with graphite drums. the old versions of printers with CrC drums have different operating conditions, those are described in §...

  • Page 12: Air Conditioning

    Site preparation manual VARYPRESS 200 AIR CONDITIONING The air-conditioned room must be built according to current building standards and respect the following points: Controlling and adjusting the temperature : Temperature gradient should not exceed ± 4 ºC/h. Controlling and adjusting the relative humidity. Relative humidity gradient should not exceed ±...

  • Page 13: Paper Storage

    Site preparation manual VARYPRESS 200 PAPER STORAGE Toner is supplied in sealed containers which should be stored with cap upward. Storage conditions Paper must not be removed from its original packaging. Isolate the cartons and rolls from the floor. To avoid a thermal shock, do not store the rolls and the cartons close to a heat source or opened windows.

  • Page 14: Cleaning

    Site preparation manual VARYPRESS 200 CLEANING 1.7.1 Cleaning of the printer The printer should be maintained and cleaned regularly to remove paper and toner particles which may adhere to it. For printer cleaning and toner box emptying, the customer must use a vacuum cleaner equipped with an external absolute filter.

  • Page 15: Specific Tool For Installation

    Site preparation manual VARYPRESS 200 SPECIFIC TOOL FOR INSTALLATION To install the printer, the field engineer needs in addition with the standard tools (Allen wrenches, screwdriver...): - a pipe wrench of 22 mm - a wrench of 27mm (flat type, open end) - a wrench 1"...
  • Page 16 Site preparation manual VARYPRESS 200 Go to "Table of contents"...

  • Page 17: Site Requirements

    Site preparation manual VARYPRESS 200 Site requirements INTRODUCTION This section provides the information required for the development of a layout of the printer installation. This layout must be ready before the delivery of the printer. The following subjects are covered: Physical specifications.
  • Page 18 Site preparation manual VARYPRESS 200 STANDARD PRINTER Fixing module Print module 1720 Unfolder 1000 1425 Footbrige 3310 1030 Go to "Table of contents"...
  • Page 19 Site preparation manual VARYPRESS 200 STANDARD PRINTER POST-PROCESSING EXTRACTION EXTRACTION FLASH FIXING MODULE 1073 PRINT MODULE 1600 FOOTBRIDGE / UNWINDER Go to "Table of contents"...
  • Page 20 Site preparation manual VARYPRESS 200 S.E.D. PRINTER Fixing module Print module 1720 Unfolder 1000 1425 Footbrige 3400 1030 Go to "Table of contents"...
  • Page 21 Site preparation manual VARYPRESS 200 S.E.D. PRINTER POST-PROCESSING PAPER CHUTE PRINTER 1600 FOOTBRIDGE UNFOLDER PRE-PROCESSING Go to "Table of contents"...

  • Page 22: Air Conditioning Unit For Write Heads

    Site preparation manual VARYPRESS 200 2.2.2 Air conditioning unit for write heads Dimensions Lenght: 800 mm Width: 510 mm Height: 1000 mm Weight: 80 Kg Rear view Overflow pipe 80 mm It is recommended to insert a water collecting pan under the air-conditioning unit because water can flow by the overflow pipe when the air-conditioning unit has an incident (failure of the water level sensor, the resistance or the thermostat).
  • Page 23 Site preparation manual VARYPRESS 200 Layout 1000 maxi Air conditioning unit VARYPRESS 200 Cable L=1.9m FOOTBRIDGE Pipe L=1.7m 1500 maxi VARYPRESS 200 The air-conditioning unit must be FOOTBRIDGE positioned in this area Air conditioning unit Go to "Table of contents"...

  • Page 24: Floor Space Requirements

    Site preparation manual VARYPRESS 200 2.2.3 Floor space requirements The floor space requirements defined in this section are the minimum requirements. If the printer is installed in too small an area, problems will occur when operating the printer. POST-PROCESSING PRINTER 1000 1600 1000...
  • Page 25 Site preparation manual VARYPRESS 200 Doors and covers opening Filter door Toner bottle door Side door Front door Go to "Table of contents"...

  • Page 26: Raised Floor Cutouts

    Site preparation manual VARYPRESS 200 2.2.4 Raised floor cutouts If the floor is a standard computer room raised floor, cut the floor tiles according to figure 1-4 for the power and interface cables. POST-PROCESSING PLAN VIEW FIXING MODULE 70x70 70x70 PRINT MODULE 1600...

  • Page 27: Installing A Pumping System At The Filtration Unit Outlet

    Installation will be carried out in compliance with current building safety standards. Check that there is no back pressure at the air flow outlet outside the building. Characteristics of NIPSON turbine (can be provided by the customer): Air flow rate Voltage Maxi.
  • Page 28 Site preparation manual VARYPRESS 200 Simplex installation Delivered with the printer The turbine can be delivered with the printer or provided by the customer provided by the customer 1,720 m 2-12 Go to "Table of contents"...
  • Page 29 Site preparation manual VARYPRESS 200 Example of duplex installation Delivered with the printer The turbine can be delivered with the printer or provided by the customer provided by the customer 1.720 m 2-13 Go to "Table of contents"...
  • Page 30 Site preparation manual VARYPRESS 200 Another example of duplex installation Delivered with the printer The turbine can be delivered with the printer or provided by the customer provided by the customer 1.720 m 2-14 Go to "Table of contents"...

  • Page 31: Option With Internal Smoke Filtration

    Site preparation manual VARYPRESS 200 2.2.5.2 Option with internal smoke filtration This option is available for VaryPress 200-10 and VaryPress 200-20 printers but not for VaryPress 200-30 printers. Filtration option included in the printer Smoke filters 2-15 Go to "Table of contents"...

  • Page 32: Location Of The T.e.d. Printer

    PRE- PROCESSING CONDITIONING UNIT 4440 1 030 TURNER INPUT POST- FOOTBRIDGE PROCESSING RECTO PRINTER T.E.D. FOOTBRIDGE VERSO PRINTER NIPSON printer Complement for L T.E.D. option Complement for double simplex Pre/post-processing POST- PROCESSING 2-16 Go to "Table of contents"...

  • Page 33: U-Shaped Installation

    Site preparation manual VARYPRESS 200 2.2.6.2 U-shaped installation RECTO PRINTER paper passage input output VERSO PRINTER 2-17 Go to "Table of contents"...
  • Page 34 LOOP UNFOLDER + INPUT FOOTBRIDGE RECTO PRINTER 1600 1600 to 2300 1600 VERSO PRINTER INPUT FOOTBRIDGE PAPER or PRE- POST PROCESSING PROCESSING NIPSON printer Complement for U T.E.D. option Complement for double simplex Pre/post-processing 2-18 Go to "Table of contents"...

  • Page 35: S-Shaped Installation

    Site preparation manual VARYPRESS 200 2.2.6.3 S-shaped installation RECTO PRINTER output input VERSO PRINTER paper passage 2-19 Go to "Table of contents"...
  • Page 36 LOOP VERSO PRINTER RECTO PRINTER CONDITIONING UNIT 1600 1300 to 2000 1600 UNFOLDER + INPUT FOOTBRIDGE INPUT FOOTBRIDGE PRE- PROCESSING POST PROCESSING NIPSON printer Complement for S T.E.D. option Complement for double simplex Pre/post-processing 2-20 Go to "Table of contents"...

  • Page 37: Z-Shaped Installation

    Site preparation manual VARYPRESS 200 2.2.6.4 Z-shaped installation VERSO PRINTER RECTO PRINTER output paper passage input 2-21 Go to "Table of contents"...
  • Page 38 Site preparation manual VARYPRESS 200 POST PROCESSING Z-shaped installation NIPSON printer Complement for Z T.E.D. option VERSO Complement for double simplex PRINTER Pre/post-processing UNFOLDER + INPUT FOOTBRIDGE TURNER PLATFORM T.E.D. LOOP RECTO PRINTER 1600 1600 1300 to 2000 1600 INPUT...
  • Page 39 Site preparation manual VARYPRESS 200 2.2.6.5 I-shaped installation (in line) VERSO PRINTER RECTO PRINTER output paper passage input 2-23 Go to "Table of contents"...

  • Page 40: I-Shaped Installation (In Line)

    Site preparation manual VARYPRESS 200 i-shaped installation POST PROCESSING VERSO PRINTER 1600 UNFOLDER + INPUT FOOTBRIDGE TURNER T.E.D. LOOP RECTO PRINTER 1600 INPUT FOOTBRIDGE NIPSON printer Complement for i T.E.D. option Pre/post-processing PRE- PROCESSING 2-24 Go to "Table of contents"...

  • Page 41: Electrical Requirements

    Site preparation manual VARYPRESS 200 ELECTRICAL REQUIREMENTS 2.3.1 Installation conditions An insulated grounding connector that is identical in size, insulation material, and thickness to the grounded and ungrounded branch-circuit supply connectors except that it is green with or without one or more yellow stripes is to be installed as part of the branch circuit that supplies the unit or system.
  • Page 42 Site preparation manual VARYPRESS 200 A transformer 208V/400V can be used to connect the printer(s) Transformer 40 kVA for 1 printer 400 V Customer Printer breaker breaker 125 A 80 A Curve D Ground Ground Cable 16 mm - AWG 6 Cable 25 mm - AWG 4 Transformer 80 kVA...

  • Page 43: Main Circuit Breaker

    Site preparation manual VARYPRESS 200 2.3.4 Main circuit breaker NOTE: If the printer is directly connected to the mains, a "mushroom" emergency stop button must be placed in the installation (responsibility of the customer). It must cut any source of energy on the whole installation.

  • Page 44: Pre And Post Processing Ground Wire

    Site preparation manual VARYPRESS 200 2.3.6 Pre and post processing ground wire The pre and post processing ground wires must be fitted, on the printer end, with closed D5 type terminal tags. 2.3.7 Air conditioning unit for write heads Mains power : 230V 50Hz or 60Hz Power consumption: 2 kW Connect the air conditioning unit to a circuit breaker, 15A, 2 poles (Curve D).

  • Page 45: Motorised Loop (U-Shaped Or S Or Z)

    Site preparation manual VARYPRESS 200 2.3.9 T.E.D. motorised loop (U-shaped or S or Z) Mains power : 230V 50Hz or 60Hz 1 phase + Neutral Power consumption: 1 kW Connect the motorised loop to a circuit breaker, 15A (Curve D). 2-29 Go to "Table of contents"...

  • Page 46: U.p.s

    To ensure the P.C. safety, a U.P.S. can be added with the following characteristics: U.P.S. 1000 VA need of a dry contact board. The U.P.S. and the dry contact board are not supplied by NIPSON but the following equipments are recommended because they were tested with the printer: Manufacturer U.P.S.

  • Page 47: Remote Maintenance

    Site preparation manual VARYPRESS 200 REMOTE MAINTENANCE The remote maintenance system must be installed to enable the field technicians and engineers to remotely access the printer requiring a diagnostic or an intervention (software update ...). Required Equipment An analogical telephone line reserved for connection of the modem, providing direct-number access (direct line or possibility of line selection when connecting to the telephone switchboard).

  • Page 48: Interface Connection

    CAUTION: Your printer will be connected to a host system. If Nipson does not deliver this system, to avoid very nasty surprise with the installation, please check the compatibility of this system and the version recommended by Nipson.

  • Page 49: Connection To The Adapted Network

    Site preparation manual VARYPRESS 200 2.5.1.2 Connection to the adapted network Switch or HUB 10/100/1000 BASE-T supplies to provide 2 Ethernet cables Ethernet cable 10/100/1000 BaseT 10/100/1000 BaseT 20 m 10 m Print Server Platform PRINTER 2.5.1.3 Connection to the isolated network Ethernet LAN Check the (Factory)

  • Page 50: Connection Of The Printer To The Network

    The Ethernet cable is provided with the printer, and needs to be connected to the Ethernet network of the company. The IPDS licence for the U_NetPSF connection has to be ordered to NIPSON during the installation of the printer. 2.5.2.3...

  • Page 51: Connection To The Host System

    Site preparation manual VARYPRESS 200 2.5.3 Connection to the host system 2.5.3.1 VPServer connection Refer to the VaryPress PrintServer user guide. 2.5.3.2 Connection to PRESS V4 PRES software from PrintSoft is configured by the registry of Windows. Launch regedit and select directory: HKEY_LOCAL_MACHINE\SOFTWARE\PrintSoft\PReS\IPDS\prn1 The main parameters to be configured are: DeviceName=TCPIP,192.90.225.108,5001...

  • Page 52: Connection To Printnet V3 From Gmc

    The "FontCaps" parameter must be equal to 2. The PrintCaps" parameter must be equal to 0 for a standard machine and to 64 for a SpotColor equipped machine. Machine parameters for NIPSON's printers, IPDS 600 and IPDS 300 groups: [IPDS 600] MachineType=131...
  • Page 53 It must contain an "[IPDS]" group which contains the controller type ("ControllerType" parameter) equal to NIPSON, the emulated printer ("KompatibleType" parameter) equal to 3900 and the buffer size (" PageBuffer" parameter) equal to 127 for a STANDARD machine and (" PageBuffer_Duplex "...
  • Page 54 Site preparation manual VARYPRESS 200 WaitResetTime=10 Max_Transfer_Length=16 AutoRestartAfterPaperEnd=Yes DefaultFontMetrics=FIXED ResponseTimeout=120 Exception_UndefinedCharacter=0 Exception_PrintOutsidePage=0 Exception_AllOther=0 PrintExceptionNumber=0 UseNewLoadImageCommand=1 PictureCompression=2 OverlayCompression=2 PagesPerAcknowledge=1 AutoRestartAfterException=Yes CleanPageBufferAfterException=Yes IgnoreEmptyDoubleByteSections=Yes LCA_Programm=C:\GMC\PM_IPDS\BOOT\LCA.BIN CCA_Programm=C:\GMC\PM_IPDS\BOOT\PCI_dwn.BIN JPEGQuality=70 EPSResolution=machine EPSBitsPerPixel=1 UsePageSegments=1 NumberOfPagesegments=127 IntercomTraceLevel=0 SpotColor1=BLUE SpotColor2=RED SpotColor3=MAGENTA SpotColor4=GREEN SpotColor5=CYAN SpotColor6=YELLOW SpotColor7=BROWN IncrementalRestartPage=0 InterkomPCIDelay=50 NipsonSplitOverlays=0 [TCP_IP] IP_Port=5001 TCP_Address=172.25.16.32 BufferSize=1452...

  • Page 55: Connection To Printnet T From Gmc

    Site preparation manual VARYPRESS 200 2.5.3.4 Connection to PRINTNET T from GMC The printing characteristics must be as follows: 2-39 Go to "Table of contents"...
  • Page 56 Site preparation manual VARYPRESS 200 The connection configuration must be as follows, with the Page Buffer parameter set to 128 in case of a simplex printer and 256 for a duplex printer. 2-40 Go to "Table of contents"...

  • Page 57: Connection To Os390 + Mvs From Ibm

    Site preparation manual VARYPRESS 200 2.5.3.5 Connection to OS390 + MVS from IBM The site system engineer must register the printer on the IBM system and check that the PSF software is installed. If the printer replaces another printer already connected to the host system, the registration exists. The system engineer has therefore nothing to modify.
  • Page 58 /* DEVICE FORMDEF DEFAULT CHARS=GT5F, /* DEVICE DEFAULT FONT SET TRACE=NO /* BUILD INTERNAL TRACE FAILURE=WCONNECT, /* ATTEMPT RECONNECT DISCINTV=0, /* NO TIME OUT MGMTMODE=IMMED, /* MAINTAIN SESSION IPADDR=`192.44.50.150', /* IP ADDRESS OF NIPSON PRINTER //PRT20 ENDCNTL 2-42 Go to "Table of contents"...

  • Page 59: Connection To Infoprintmanager From Ibm

    Site preparation manual VARYPRESS 200 2.5.3.6 Connection to InfoPrintManager from IBM In the printer properties, configure the Configuration tab and Adjustments tab as follows: 2-43 Go to "Table of contents"...

  • Page 60: Sdp Protocol Network Interface (Openpage)

    Site preparation manual VARYPRESS 200 2.5.3.7 SDP Protocol Network Interface (OpenPage) Internet @: supply the printer @ Port number: 1090 (data) 1091 (commands) NOTE 1: In the case of an OpenPage connection of type XTI, put 1050 for the port number. NOTE 2: The port numbers and the type of acquisition (XTI or TCP) can be modified by the administration menus of the printer.

  • Page 61: Unpacking And Installation Preparation

    Site preparation manual VARYPRESS 200 UNPACKING AND INSTALLATION PREPARATION So that the printer is unpacked and installed in the best possible conditions, the following points must be considered when preparing the site. 2.6.1 Unloading the lorry Easy access for the lorry. Unloading bay required.
  • Page 62 Site preparation manual VARYPRESS 200 2-46 Go to "Table of contents"...

  • Page 63: Pre / Post Processor Devices

    Site preparation manual VARYPRESS 200 Pre / post processor devices IDENTIFICATION The specification defines a protocol for exchange of data and hardware interface between the printer and two pre and post processing and a camera system. INTERFACE CONNECTOR DEFINITION Pre post-processing device 1 connector (on printer interface side) D-SUB 37 pins , Female Nº...
  • Page 64 Site preparation manual VARYPRESS 200 Pre post-processing device 2 connector (on printer interface side) D-SUB 37 pins , Female Nº PIN SIGNAL Nº PIN SIGNAL TXD2_H TXD2_L RXD2_H RXD2_L VITRD2+ 0V (VITRD2-) PP2PRT+ 0V (PP2PRT-) +12V (NTPI2+) NTPI2- SDP2+ SDP2- PP2CNT+ 0V (PP2CNT-) PP2MA+...

  • Page 65: Input/Output Signals

    Site preparation manual VARYPRESS 200 INPUT/OUTPUT SIGNALS 3.3.1 Signals from printer to pre-post processing device 1/6 of an inch displacement signal 1 (NTPI1) and (NTPI2) The printer generates a positive pulse for each 1/6 inch paper movement. This signal is designed to synchronize the Pre-Post-Processing device with the printer.
  • Page 66 Site preparation manual VARYPRESS 200 Serial connection (RXD1_H, RXD1_L) and (RXD2_H, RXD2_L) The printer transmits information to the Pre-Post Processing device through a serial connection in differential mode ( RS422). Sheet detection (PLIPTC1) and (PLIPTC2) The printer generates a pulse every sheet of paper feed. 22ms <...

  • Page 67: Signals From Pre-Post Processing Device To Printer

    Site preparation manual VARYPRESS 200 3.3.2 SIGNALS FROM PRE-POST PROCESSING DEVICE TO PRINTER Pre-post processing device connected (PP1CNT) and (PP2CNT) This signal indicates to the printer that a Pre-Post Processing Device is connected (but not necessarily ready). If the Pre-Post Processing Device is present, the printer can disable its internal stacker. "0": connected "1": not connected Pre-post processing device ready (PP1PRT) and (PP2PRT)

  • Page 68: Signals From Camera System To Printer

    Site preparation manual VARYPRESS 200 Stop request by pre-post processing device (PP1DARR) and (PP2DARR) This signal indicates to the printer that it stop. NOTE: This signal is used with PP1DMAR when PP1MA is not used. "0": stop command "1": no stop command 500ms <...

  • Page 69: Output Signals From Printer To Camera System

    Site preparation manual VARYPRESS 200 3.3.4 Output signals from printer to camera system 1/6 of an inch displacement signal 3 (NTPI3) The printer generates a positive pulse for each 1/6 inch paper movement. This signal is designed to synchronize the Camera system with the printer. The ratio between low and high signals is 50%.

  • Page 70: Electrical Signal Specification

    Site preparation manual VARYPRESS 200 ELECTRICAL SIGNAL SPECIFICATION 3.4.1 Signals from printer to the external device The output signal interface can be adapted to the external device interface in 4 different output types: Switch Opto Isolated Current source Differential Each output contains 2 pins marked +,- designed to adapt the printer interface to the Pre/Post-pro- cessing device interface.
  • Page 71 Site preparation manual VARYPRESS 200 Current source "0": I = 10 mA "1": I = 0 mA PRINTER EXTERNAL DEVICE INTERFACE INTERFACE +12V 0 ohms < R < 400 ohms Courrent Source I Opto Isolated ouput "0": I = 10 mA "1": I = 0 mA PRINTER EXTERNAL DEVICE...

  • Page 72: Signals From The External Device To The Printer

    Site preparation manual VARYPRESS 200 Differential serial output PRINTER EXTERNAL DEVICE INTERFACE INTERFACE RXD_H Line driver 3487 RXD_L 3.4.2 Signals from the external device to the printer The input signal interface can be adapted to the printer interface in 3 different input types: Switch Opto Isolator Differential...
  • Page 73 Site preparation manual VARYPRESS 200 Opto isolated input "0": I = 10 mA "1": I = 0 mA PRINTER EXTERNAL DEVICE INTERFACE INTERFACE 74HC14 2.2microF Differential serial input PRINTER EXTERNAL DEVICE INTERFACE INTERFACE TXD_H Line receiver 3486 TXD_L 3-11 Go to "Table of contents"...

  • Page 74: Cables

    Site preparation manual VARYPRESS 200 CABLES NOTE: In all cases the cables are supplied with the Pre/Post Processor equipment. 3.5.1 Cable between printer and pre/post processor devices Connection have to be established by means of a shielded cable and two connectors witch metallic cover.

  • Page 75: Start/Stop Signal Steps

    Site preparation manual VARYPRESS 200 3.6.2 start/stop signal steps Start Stop Stop PRINTER WAITING PRINTING WAITING STATUS Wait incident not wait incident Wait incident In case S/S = "0L" (stop) a "wait" incident will be displayed on the panel as "PRE/POST PROCESSING STOP"...

  • Page 76: Requirements

    Site preparation manual VARYPRESS 200 REQUIREMENTS 3.7.1 Using a pre processor device During a stoppage caused by pre-post processing, the printer does not stop immediately but finishes printing the current page. For this reason the printer cannot work with "taut paper" between the Pre- Processor Device and the Paper Input to the Printer.

  • Page 77: Using A Post Processor Device

    Site preparation manual VARYPRESS 200 3.7.2 Using a post processor device The Post-Processing Device must be capable to handle a backward paper movement of maximum 150 mm equal to that of printer. The tension "F" exercised by the Post Processor device on the paper at the output of the printer must not exceed 5 Newtons.
  • Page 78 Site preparation manual VARYPRESS 200 3-16 Go to "Table of contents"...

  • Page 79: Product Packing

    Site preparation manual VARYPRESS 200 ST20 PRODUCT PACKING The stacker and the box with the accessories are fixed on a pallet and protected with a cover. They are surrounded with a sleeve placed on the pallet. The unit is covered with a top, and steel strips are used fasten the parts together.

  • Page 80: Physical Specifications

    Site preparation manual VARYPRESS 200 PHYSICAL SPECIFICATIONS Depth: 880 mm Length: 650 mm (hors capteur boucle) Height: 1420 mm Weight: 193 kg Floor loading: 10 kg/m Floor characteristics: Standard computer room raised floor. 4.2.1 Standard ST20 stacker dimensions and clearance areas 1250 ST20 PRINTER...

  • Page 81: Dimensions And Clearance Areas Of St20 90

    Site preparation manual VARYPRESS 200 4.2.2 Dimensions and clearance areas of ST20 90° Note: This stacker can be placed at a 90° angle, either forward, or backward printer. PLAN VIEW Operator Stick onto the floor yellow and black adhesive bands spaced 50 mm apart (47286537-001) Plate clearance area 1250...

  • Page 82: Raised Floor Cutouts

    Site preparation manual VARYPRESS 200 4.2.3 Raised floor cutouts Floor cutout to feed the power supply and interface cables through Ø 75 Operator Ø 75 Stacker plate in extracted stacker immobilizing feet position to unload paper Casters to move the unit PLAN VIEW Go to "Table of contents"...

  • Page 83: Electrical Specifications

    Site preparation manual VARYPRESS 200 ELECTRICAL SPECIFICATIONS 4.3.1 Mains voltage supplies 230 V - 50 Hz Voltage tolerance: +10 %, -10 % Frequency tolerance: + 0.5 Hz Single phase Three wire cable: phase, neutral and earth Power consomption: 220 VA Current: 1 A 120 V - 60 Hz Voltage tolerance: +10 %, -13,5 %...

  • Page 84: Interface Specification

    Site preparation manual VARYPRESS 200 INTERFACE SPECIFICATION 4.5.1 Interface connector The ST20 interface connector is of the SUB-D 37 channel, Female type. Pin assignments of the connector: Si gna l na me L oc at i o n D ir e ct i o n T X D _H Pi n 1 ou tp u t...

  • Page 85: Identification

    (enabling the transmission of the form height from the printer to the ST20) cf specification Nº 47287014 "Pre-post processing orders/status interface IMPORTANT: This is valid only when the ST20 is connected to the NIPSON printer. Go to "Table of contents"...

  • Page 86: Outputs

    Site preparation manual VARYPRESS 200 4.5.4 Outputs Stacker connected (STCNT+, STCNT-) Informs the printer that the ST20 is present (but not necessarily ready!). This may possibly enable the printer to totally or partially invalidate its internal stacker. "0": connected "1": not connected Stacker ready (STPRT+, STPRT-) Informs the printer that the ST20 system is ready.
  • Page 87 Response to the paper parameters dialogue (enabling the acknowledgement of the form height received by the ST20) cf. SPECIFICATION nº 47287014 PRE-POSTPROCESSINGORDERS/STATUSINTERFACE" IMPORTANT: This is valid only when the ST20 is connected to the NIPSON printer. Go to "Table of contents"...

  • Page 88: Electric Specification Of The Signals

    Site preparation manual VARYPRESS 200 4.5.5 Electric specification of the signals Output signals: The signal interface is of the opto coupler type. Each output has 2 terminals referenced +,- which enable the adaptation of the interface between the printer and the ST20. NOTE : The serial link output signal is in differential mode.
  • Page 89 Site preparation manual VARYPRESS 200 Input signals The signal interface is of the input by opto coupler type. Each input has 2 terminals referenced +,- that enables the adaptation of the interface between the printer and the ST20. NOTE : The serial link input signal is in differential mode. Opto coupler input ST20 EXTERNAL SYSTEM...

  • Page 90: Cables

    Site preparation manual VARYPRESS 200 4.5.6 Cables ST20 / PRINTER interface link cable The link must be made by a shielded cable with two connectors with metallic housing. The shielding of the cable must be repeated for the housing of each connector. Equipotential earthing link The link between the ST20 stacker and the printer must be established by a cable with a gauge of 8 or 10 mm2 cross-section.

  • Page 91: Page Printer Implementation Plan

    Activities since arrival of the printer: Assist the customer engineer in configuring the NIPSON printer. Assist the customer engineer with the performance of the complete test of the NIPSON printer and the channel attachment. Have printer operator(s) available for training at installation time.
  • Page 92 Site preparation manual VARYPRESS 200 SITE PREPARATION SUMMARY BEFORE DELIVERING THE NIPSON PRINTER Dimensions Plan the surfaces required for installation.............. Plan the machine connections................Plan the cutouts in the false bottom............... Plan the installation of the pre/post-processing equipment ........Strengthen the false bottom, if necessary .............
  • Page 93 DATE: SOCIETE / COMPANY: ADRESSE / ADDRESS: Please give this technical publications remarks form to your NIPSON representative or mail to address below. Remettez cet imprimé à un responsable de NIPSON ou renvoyez le à l’adresse ci-dessous. NIPSON SAS 28, rue E. Thierry-Mieg - BP 257 - 90005 Belfort Cedex - France Tel.: +33 (0)3 84 54 50 00 - Fax: +33 (0)3 84 54 52 18...

This manual is also suitable for:

Varypress 200-20Varypress 200 seriesVarypress 200-30

Table of Contents