MAIN BEAM
HEADLIGHTS
To replace the bulb, proceed as
follows:
❒ remove the protective rubber cap
described previously;
❒ release the two bulb holding clips
A fig. 93;
❒ remove the bulb and replace it;
❒ fit the new bulb, making the outline
of the metallic part coincide with the
grooves on the reflector, then
reattach the bulb holding clips;
❒ refit the rubber cap.
93
SIDE LIGHTS / DAYTIME
RUNNING LIGHTS
To replace the bulb, proceed as
follows:
❒ remove the protective rubber cap
described previously;
❒ turn the bulb holder B fig. 93
anticlockwise and remove it;
❒ remove the snap-fitted bulb and
replace;
❒ refit the bulb holder B by turning it
clockwise and locking it correctly;
❒ refit the rubber cap.
DVDF0S0119c
DIRECTION INDICATORS
Front
To replace the bulb, proceed as
follows:
❒ remove the protective rubber cap
described previously;
❒ turn the bulb holder A fig. 94
anticlockwise and remove it;
❒ remove the snap-fitted bulb and
replace;
❒ refit the bulb holder A by turning it
clockwise and locking it correctly;
❒ refit the rubber cap.
94
DVDF0S0116c
89