Identification Plate; Warranty Conditions - pilotair ACT 3T User’s Maintenance & Spare Parts Manual

1

Identification plate

The identification plate is located on the back of the dryer and shows all the primary data of the machine. This
data should always be referred to when calling the manufacturer or distributor. The removal or alteration of the
identification plate will void the warranty rights.
2

Warranty conditions

For 12 months from the installation date, but no longer than 14 months from the delivery date, the warranty
covers eventual faulty parts, which will be repaired or replaced free of charge, except the travel, hotel and
restaurant expenses of our engineer.
The warranty doesn't cover any responsibility for direct or indirect damages to persons, animals or equipment
caused by improper usage or maintenance, and it's limited to manufacturing faults only.
The right to warranty repairs is subordinated to the strict compliance with the installation, use and maintenance
instructions contained in this manual.
The warranty will be immediately voided in case of even small changes or alterations to the dryer. To require
repairs during the warranty period, the data reported on the identification plate must be notified.
5 | P a g e
Identification Plate
7425MUM217_EN_05.0