7.12
Electronic Instrument DMC 15 (Standard)
7.12.1 How to Switch On the Dryer
-
Power the dryer and switch it on using the ON-OFF switch (pos.1 paragraph 7.1).
-
During normal operation led
means of two coloured areas (green and red) above a 10 Led display :
• Green area - operating conditions ensuring an optimal DewPoint;
• Red area - DewPoint too high, the dryer is operating with high thermal load (high inlet air
temperature, high ambient temperature, etc.). Compressed air treatment may be improper.
Led
Led
-
The condensate drain test is always active using the button
7.12.2 How to Switch Off the Dryer
-
Switch it off using the ON-OFF switch (pos. 1 paragraph 7.1).
7.12.3 How a Service Warning / Alarm is Displayed
-
A service warning / alarm is an unusual event that must recall the attention of the operators / maintenance
technicians. It does not stop the dryer.
-
Service warnings / alarms are automatically reset as soon as the problem is solved.
NOTE: the operator / maintenance technician must inspect the dryer and verify / solve the problem
that generated the service warning
24 |
P a g e
Technical Description
ON is ON and the display shows the DewPoint temperature by
shows that condensate drain solenoid valve is ON.
shows that condenser fan is ON (Not used).
.
.
7425MUM217_EN_05.0