Advertisement
Quick Links
Thank you for choosing Mi Smart Home Kit
Mi Smart Home Kit - is a multifunctional gateway with a
presence of motion sensor, for windows / doors and the
main hub. This set of devices is very easy to install and
they are quite easy to manage.
Via Mi Smart Home Kit, you can use these functions: a
night light, smart notifications, wireless doorbell, and also
these can be variously combined with other smart devices.
* This device is intended for indoor use only
* the whole set of Mi Smart Home Kit, on release from the
factory, is by default connected to the gateway, so after
installation of the device, you can immediately use it.
Connecting the new device
First, connect the multifunctional gateway to the power
supply and at the same time, make sure you connect your
smartphone to a WiFi network. Open the Mi Smart home
App and choose a fast connection of new devices or in the
upper right corner, click +, and add to the list of devices Mi
Smart Home Kit.
* The best place
to connect the
multifunctional gateway:
away from the wireless
router, with the best
distance of 2 meters.
multifunctional gateway
motion detector sensor
sensor for windows/doors
the main hub
Sharing Device
In order to use the device
simultaneously with other users,
on the main page of Mi Smart
Home Kit press button "options"
and you will be able to connect to
the other members of the family
Mi Smart Home Kit.
Quick Setup
Download an application
In Mi store find «Mi Smart House» or scan
the QR-code.
Meet your devices
Mi multifunctional gateway
One click: On / Off
Double-click : home security (on / off)
Three clicks: adding devices
LED lighting
* safe use of the device in
areas that are below 2000
Speaker
meters above sea level
The Mi multifunction gateway has a built-in Smart Module
- this is the control center of Mi Smart Home Kit. Due to
the multifunction gateway, each sensor can be connected
to other Smart devices.
Advertisement
Related Manuals for Xiaomi Mi Smart Home Kit
Summary of Contents for Xiaomi Mi Smart Home Kit
- Page 1 * This device is intended for indoor use only * the whole set of Mi Smart Home Kit, on release from the factory, is by default connected to the gateway, so after installation of the device, you can immediately use it.
- Page 2 - The doorbell and its volume can be adjusted in the Smart 3. Mi Smart Home Kit is designed to inform about the status House App 1: Night Light of devices, and not for a special home security, buildings, warehouses or any business premises.
- Page 3 Installation to the back of any surface or wall. Remove the protective Distance for the effective operation of the device: select a * Optimal height at which the sensor should be, 1.2-2.1m. membrane suitable site for the installation of the sensor, it is necessary At a height of less than 1.2 m, the detection range becomes to reset the factory settings using a special needle.
- Page 4 - Damage that does not meet "fault list" service center substances Warranty Xiaomi; Warranty service is carried out in accordance with the law on There are no any of elements of Pb,Hg,Cd,Cr6+, P, BB, - Failure of the "fault list", which arose in connection with the «the rights of consumers of China»...