Advertisement
Mi Smart Home Kit - is a multifunctional gateway with a presence of motion sensor, for windows / doors and the main hub. This set of devices is very easy to install and they are quite easy to manage.
Via Mi Smart Home Kit, you can use these functions: a night light, smart notifications, wireless doorbell, and also these can be variously combined with other smart devices.
* This device is intended for indoor use only
* The whole set of Mi Smart Home Kit, on release from the factory, is by default connected to the gateway, so after installation of the device, you can immediately use it.
First, connect the multifunctional gateway to the power supply and at the same time, make sure you connect your smartphone to a WiFi network. Open the Mi Smart home App and choose a fast connection of new devices or in the upper right corner, click +, and add to the list of devices Mi Smart Home Kit.
* The best place to connect the multifunctional gateway: away from the wireless router, with the best distance of 2 meters.
In order to use the device simultaneously with other users, on the main page of Mi Smart Home Kit press button "options" and you will be able to connect to the other members of the family Mi Smart Home Kit.
Download an application
In Mi store find «Mi Smart House» or scan the QR-code.
* safe use of the device in areas that are below 2000 meters above sea level
The Mi multifunction gateway has a built-in Smart Module - this is the control center of Mi Smart Home Kit. Due to the multifunction gateway, each sensor can be connected to other Smart devices.
In infrared motion sensor is used function to detect movement of people or animals indoors. Low power consumption, easy installation without tools, placement anywhere.
Sensor for windows / doors consists of a main sensor and the magnet, which are installed close to each other and fixing initial position of windows or doors. Low power consumption, easy installation without tools, install and use immediately.
The main hub - a new type of remote control devices, with low power consumption. Very compact, so it can be placed anywhere, easy to install without tools. Install and use immediately, you can easily control the operation of lamps, sockets and smart devices.
After a quick installation of the device in accordance with the instructions, and after a successful connection to the Smart Home Kit smartphone user, you can enjoy all the advantages of this device:
You need to know
Distance for the effective operation of the device: select a suitable site for the installation of the sensor, it is necessary to reset the factory settings using a special needle. After this multi-function gateway will make a corresponding sound, which signals that you chose the optimal distance between the sensor and a multi-function gateway.
Method 1: You do not have to stick with the back of the sensor to the wall or other surface, you can simply install it in the right place.
Method 2: Remove the protective cover (in kit of your device you get adhesive membrane) and you can stick the sensor to the back of any surface or wall.
* Optimal height at which the sensor should be, 1.2-2.1m. At a height of less than 1.2 m, the detection range becomes smaller, but it does not affect its use. When you place the sensor more than 2.1m, in the room will appear blind spots, so there can be problems with finding people, animals.
* During installation, pay special attention to induction lens. It should be directed to the side of space that you want to monitor. Install or stick the sensor maximum close to the edge of a table or cabinet.
Optimal detection range / Optimal detection radius
* Glue unit on a dry surface
* Place the hub on the main non-metallic surface, since it affects its work
To add a new device or restore the factory settings, you can use one of the two following methods:
Method 1: Open the smart home and on the main page of the multifunction gateway click on «add device» by following the instructions set out below, do a factory reset.
Method 2: Continuously press three times on button of a multifunction gateway, follow the instructions set out below, do a factory reset.
* When you connect smart devices without a hole for reset, read the instructions for use of such a device
* When connecting the device to another gateway, you need to reset the device, and then add a new device by following the above described scheme.
Press on the hole with a special needle and hold it for 3 seconds, then the device status indicator blinks three times, signaling the successful resetting.
Warranty service is carried out in accordance with the law on «the rights of consumers of China» and «Law of the PRC on the quality of products.» The warranty service includes:
During the warranty period you have the right to repair, exchange or return an item. For repair, replacement or return of goods you need to present a receipt.
In case of a problem, goods can be replaced within 15 days after the signing of the guarantee
Warranty repair of purchase (product quality)
In the event of problems, possible free warranty repair of the goods within 1 year after the signing of the guarantee
The list of circumstances (including, but not limited to), under which compensation is not possible:
There are no any of elements of Pb, Hg, Cd, Cr6+, P, BB, PBDE in product or its presence is lower than the limit value according to SJ / T11363-2006 requirements.
xiaomi-mi.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Mi Smart Home Kit that isn't answered in the manual? Leave your question here.