Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Imlab IKA ULTRA-TURRAX T 10 basic
Summary of Contents for Imlab IKA ULTRA-TURRAX T 10 basic
- Page 1 39 516 00 T 10 basic ULTRA-TURRAX ®...
-
Page 2: Table Of Contents
Source language: German Contents Explanation of symbols Page General hazard EC-declaration of conformity Explanation of symbols Safety instructions This symbol identifies information that is of vital DANGER Correct use importance for safeguarding your health Unpacking and safety. Disregarding this information can Useful information lead to health impairment and injuries. -
Page 3: Safety Instructions
Note the operating instructions of the dispersing tool and accessories. Safety instructions ® can be used. Read the operating instructions in full before starting up and follow the safety instructions. Keep the operating instructions in a place where they can be Check that the turning handles are secure and tighten if necessary. -
Page 4: Correct Use
Correct use by air turbulences of the drive. The instrument starts up again following a cut in the power sup- ply. Please note that the instrument must be switched off at the ON/OFF switch in this case before the power supply is recon- When used in combination with one of our recommended dispersing nected. -
Page 5: Unpacking
Unpacking Unpacking - Please unpack the device carefully - In the case of any damage a fact report must be sent immediately (post, rail or forwarder). Delivery scope Fig. 5 One T 10 basic ULTRA-TURRAX ® dispersion equipment accord- ing to the ordered type, one clamp R 200, a shaft key, a flat key, an operating instructions, a warranty card and a decontamination Drive clearance certificate, all stored in a suitcase. -
Page 6: Working With The Unit
Disassembly (see Fig. 1 and Fig. 2) The unit is ready for service when the mains For the disassembly of the dispersion instrument from the clamp (6), plug has been plugged in. turn handle (5) firstly to loosen the clamp. The driving unit is switched on by pressing the rocker switch (2) Hold the dispersion instrument with a hand, with the other hand in "I"... -
Page 7: Note To The Flat Key And Shaft Key
If you require servicing, return the appliance in its original packag- Dirt Cleaning agent ing. Storage packaging is not sufficient. Please also use suitable isopropyl alcohol transport packaging. Construction material water containing tenside/ isopropyl alcohol Cosmetics water containing tenside/ isopropyl alcohol Foodstuffs water containing tenside Note to the flat key and shaft key... -
Page 8: Speed Table
Permitted dispersion tools Speed table Note: The speed table was calculated on the basis of a dispersion Designation Material of shank volume of 5 ml water using the dispersing tool S 10 N - 5 G. S 10 N - 5 G Stainless steel With other combinations (dispersion tools;... -
Page 9: Technical Data
Technical data Warranty In accordance with IKA ® warranty conditions, the warranty period Speed range 8.000 - 30.000 is 24 months. For claims under the warranty please contact your (at nominal designed voltage and 50 Hz) local dealer. You may also send the machine direct to our works, Speed display Scale (see speed table) enclosing the delivery invoice and giving reasons for the claim.