Safety Information - Invitrogen Countless C10227 User Manual

Safety Information

Safety
Precautions
Review and follow the safety instructions below.

Do not install the instrument in heavy humidity such as a
greenhouse or an incubator to avoid a danger of electric
shock. If water or other material enters the instrument, the
adaptor, or power inlet, disconnect the power cord and
contact a service person. For operating environment, refer to
Product Specifications (page vii).

Do not touch the main plug or power cord with wet hands.

Always ensure that the power supply input voltage matches
the voltage available in your location.

This instrument is air-cooled so its surfaces may become hot
during operation. When installing the instrument, leave a
space of more than 10 cm (4 inches) around it and do not
place any objects between the instrument and the wall.

Do not install the instrument on a slant or a place prone to
vibrations, which induces the risk of instrument malfunction
or damage of the instrument.

Never insert any objects into the air vents of the instrument as
this could result in electrical shock, personal injury, and
equipment damage.

Plug the power cord firmly into the wall outlet and AC
adapter.

To avoid potential shock hazard, make sure that the power
cord is properly grounded.

Be sure to position the equipment such that it is easy to
disconnect the instrument.

Turn off the instrument before unplugging the power cord
and/or moving the instrument.

If the instrument is broken or dropped, disconnect the power
cord and contact a service person. Do not disassemble the
instrument.

Use only authorized accessories (adaptor, power cord, and
USB drive).
Continued on next page
v