Siemens optiPoint 410 S Series Information And Important Operating Procedures page 29

Important Procedures with optiPoint display module
Used with optiPoint 410/420 standard/advance S. A plastic stylus was delivered along with your
optiPoint display module. You can select functions on the display by pressing the tip of the stylus
lightly on the display surface or move graphics content such as scroll bars.
= Open the menu
= Answer a call or start dialing
= Deflect or transfer
= Press display key
Pick up a call
Call Control
Mon 03/03/03 11:34AM
Bill Smith
987654321
Incoming Call
Click the off hook icon to the answer
call.
Deflect Incoming Call
Click the Deflect icon to deflect the
call.
o
Enter target number.
Click on Deflect to start.
Decline a call
Click the on hook icon to decline the
call. The caller will receive information
that the call has been unsuccessful..
The display returns to the idle menu.
Important Procedures with optiPoint display module
= Put a call on hold
= Retrieve a call
= Disconnect or decline
=Expand the intrusion bar
Pick up a waiting Call
Call Control
Mon 03/03/03 11:34AM
Bill Smith
987654321
Jane Brown
Consult/Transfer
Click the off hook icon to answer the
waiting call.
Call Control
Mon 03/03/03 11:34AM
Jane Brown
123456789
Bill Smith
987654321
On Hold
Conference Complete
00:24
00:24
00:24
Alternate
29