Device Description; Specifications - Wachendorff ETHSW50K Operating And Installation Instructions

Operating and Installation Instructions
3.

Device description

ETHSW50K

5 x 10/100BaseT(X)

Unmanaged / Plug and Play

IEEE 802.3, IEEE 802.3u, IEEE 802.3x

IEEE 802.3az: EEE (Energy Efficient Ethernet)

Broadcast- und Multicast-Flooding Storm Control

Redundant voltage input /
fault signal relay Output

Operating temperature -20 °C to +60 °C

Protection class IP30
3.1

Specifications

Technologies
Operating mode
Switching engine
Standards
Interfaces
RJ45 - Ports (copper)
RJ45 - Speed
RJ45 - Duplex
RJ45 - Connection
Fault alarm contact
2 x DIP switches
Features
MAC table size
Display
1 x Alarm
2 x Power Status
5 x Ethernet port status
Power supply
Execution
Voltage range
Current consumption
Store and Forward
Wire-speed / non-blocking
IEEE 802.3 (10BaseT)
IEEE 802.3u (100BaseTX)
IEEE 802.3az (EEE)
IEEE 802.3x (Full Duplex) and Back-Pressure (Half Duplex)
5x 10/100BaseT(X)
Auto Negotiation (10/100 Mbps)
Half- or Full-Duplex
MDI/MDIX Auto Crossover
Fault alarm relay for detection of power supply (normally
open, normally open, max. 1A / 24 VDC)
1 x On/Off Power Alarm (fault signal contact) (DIP 1)
1 x On/Off Flooding Storm Control (DIP 2)
1K
ALM: Power supply failure
P1, P2: Power supply status
Link & Speed
Redundant input terminal strip plug, reverse power protection
(reverse polarity protected)
12 VDC to 58 VDC
30 mA at 48V, 25 °C, full load
- 4 - Stand: 24.05.2019