Specifications - JRC GPS124 Instruction Manual

SECTION 6
Receiver type:
Accuracy:
Geodetic datum:
Data input:
Data output:
Operating temperature:
Storage temperature:
Vibration:
Waterproof:
EMC:
Input voltage:
Power consumption:
Dimensions, Mass:
*
When the Lithium battery runs out, the settings are restored to the default values. In addition, it will take about a
minute for position fix. The battery life expires in about 10 years under the normal use condition, but it may differ
depending on the environment or use conditions.
Multichannel (12CH, SBAS 1CH) all in view
13m 2DRMS (C/A code, HDOP≦4, SA off)
7m 2DRMS (SBAS corrected)
0.1knots RMS (steady state)
46 (selectable, default
Initial input,
GPS correction data (RTCM SC-104 ver.2.0, Type 1,2,7,9)
IEC61162-1 or NMEA0183 compliance
*
(selectable, default : NMEA0183 ver.1.5)
IEC61162-1 (NMEA0183 ver.2.3)
GGA, RMC, VTG, ZDA, DTM, GBS, GNS
NMEA0183 ver.2.1
NMEA0183 ver.1.5
-25℃ to +70℃
-40℃ to +85℃
IEC60945 compliance
IEC60945/USCG CFR-46 compliance
IEC60945 compliance
12/24VDC +30%, -10%
Less than 1.5W
108H×108φ(mm), less than 0.7kg
- 9 -

SPECIFICATIONS

*
: WGS-84)
GGA, RMC, GLL, VTG, DTM
GGA, RMC, GLL, VTG