Parts And Functions - JRC GPS124 Instruction Manual

SECTION 2
RECEIVER
①
②
MASS：less than 0.7kg
Set Data Input
(Yellow)
Data Output
(Green)
① RECEIVER: Receives GPS signals from up to twelve satellites and provides highly accurate position
fixing.
② CABLE: Supplies DC power for the antenna and inputs/outputs data to a navigation equipment.
8-wire cable
③ BASE: Mount unit which conforms to 1"×14 NPT standards. With this, the Receiver can
be installed onto a 1-inch antenna mount or extension mast.
④ CONNECTOR: Hooks up the receiver to a navigation equipment. 6-pin
CABLE
Fig. 2-1 Parts of GPS124
DGPS Input (Brown)
５ １
６
４
２
３
Data Common (White, Blue)
③
MOUNTING SCREW
１INCH 14 UNS-2B
CABLE LENGTH: 10m (33ft)
12V / 24V (Red)
DC DC
0V (Black)
DC
Fig. 2-2 connecter
- 3 -

PARTS AND FUNCTIONS

BASE
CONNECTOR
④