Turning On And Off; Pairing Your Headset With An Android Or Ios Device; Wearing Instruction - Sony SBH82D User Manual

Turning on and off

To turn on your headset
• Long press the power key
To turn off your headset
• Long press the power key
Hint
If your headset is left idle for 10 minutes, it turns off automatically.

Pairing your headset with an Android or iOS device

To pair your headset with an Android device, you can use either One-touch
connection (NFC) or Bluetooth. To pair your headset with an iOS device, use
Bluetooth.
After you pair your headset with an Android or iOS device, the information is
saved. Your headset can save up to eight paired devices.
To pair with an Android device using One-touch connection (NFC)
1 Make sure that your headset is fully charged.
2 On the Android device, make sure that NFC is turned on and the screen is
unlocked.
3 Touch the N-mark of your headset against the NFC detection area of the Android
device.
4 Follow the on-screen instructions on the Android device to complete the pairing.
To pair your headset with an Android or iOS device using Bluetooth
1 Make sure that your headset is fully charged and turned off.
2 On the Android or iOS device, make sure that Bluetooth is turned on.
3 Long press the power key
4 Scan for available Bluetooth devices on the Android or iOS device, then select
SBH82D.
Hint
The headset automatically enters pairing mode when it's powered on for the first time.

Wearing instruction

To wear the headphones, follow these steps.
Note
Check relevant laws and regulations on the use of mobile phones, transmitting devices and
earphones before using this device while operating a vehicle or riding a bicycle. Always give
your full attention to operating your vehicle or bicycle and the surroundings.
for 2 second. The LED indicator flashes twice in green.
for 2 second. The LED indicator flashes once in green.
for approximately 7 seconds.
6
Internet version. For personal use only.