Sony SBH82D User Manual page 7

To wear the headset
1 Hold the sound duct of the headphone (R) with your left hand.
2 Gently pull down your right earlobe with your right hand.
3 Slide the headphone from below so the driver unit goes behind your ear, then
insert the ring supporter into your ear as shown in the illustration.
4 Put on headphone (L) using the same procedure with opposite hands.
To take off the headset
• Hold the sound duct of the headphone (R), then gently slide it down to take off the
headset.
Note
Do not hold the driver unit when taking off the headphone. Holding the driver unit when
taking off the headphone may put stress on the sound duct, causing it to break.
7
Internet version. For personal use only.