RCT Power Storage DC 4.0 Setup & Installation page 13

[7.3] Battery and inverter configure
Press "menu" and choose "Setup".
6
Enter setup procedure by "Login"
7
(password: "installer").
Choose "Land and Norm", select appropriate
8
norm and "apply".
9 Wait during parameters are synchronizing and
stored. When finished press "Finish".
After the inverter has checked the specifications,
it begins to feed into the grid.
10 The Power Sensor will be detected and tuned,
automatically by an Inverter power of 200 W.
Continue with Device  Settings  Device
settings (scroll down)  Power Sensor tuning
(scroll down)
If current sensors are tuned and detected press
"FLASH" to store settings permanent, finish!
For further configurations please refer to user
manual.
Go to "Device" and click "Settings" press "Battery"
11
and choose "Battery type".
13
menu