Ap Mode - Kodak PIXPRO WPZ2 User Manual

1. Rotate the mode dial to
Wi-Fi selection interface.
2. Press the left/right arrow buttons to select and
set options.
Wi-Fi Mode
Settings
In AP mode, the camera will act
as an access point enabling another
Wi-Fi device to connect to it.
• [
Settings] ：
Customize the Wi-Fi settings for the camera
system.
• [Station] ：
Use the Station Mode to connect to a
"Personal Hotspot" created by your mobile
device.
• [AP Mode] ：
In AP mode, the camera will act as an
access point enabling another Wi-Fi device
to connect to it.
Press the mode button to disconnect.
and then enter the
Station

AP mode

AP Mode
This camera may connect with your smart device
through Wi-Fi.
Settings of Camera:
1. Select and press the
setting interface.
2. Press the up/down buttons to select options to
be adjusted, and press the
the option setting interface.
Setting pre-connected device for the
following serial number:
SSID: PIXPRO WPZ2_XXXX
WPA2-PSK:
• Refresh: Create a new WPA2 PSK password.
• Back: Back to previous page.
button to enter the
button to enter
AP mode
XXXXXXXX
Refresh
Back
39