Installation Diagrams - State Water Heaters ROOFTOP SRT80 120NE Installation & Operation Instruction

ONE TEMPERATURE - ONE HEATER VERTICAL STORAGE TANK FORCED CIRCULATION
CAUTION: IF BUILDING COLD WATER SUPPLY HAS A BACK-FLOW PREVENTER, CHECK VALVE OR WATER METER WITH CHECK VALVE PROVISIONS FOR THERMAL
EXPANSION OF WATER IN THE HOT WATER SYSTEM MUST BE PROVIDED
NOTE: CONNECT RETURN LINE FROM HOT WATER CIRCULATING LOOP (IF USED) TO COLD WATER INLET LINE.
*
PIPE TO OPEN DRAIN
INSTALL IN ACCORDANCE WITH LOCAL CODES
FORCED CIRCULATION WITH OR WITHOUT BUILDING RECIRCULATION
DANGER
TEMPERATURE SETTING SHOULD NOT EXCEED
SAFE TEMPERATURE AT FIXTURES. SEE WATER
TEMPERATURE CONTROL WARNING ON PAGE 5.
IF HIGHER PREHEAT TEMPERATURES ARE
NECESSARY TO OBTAIN ADEQUATE BOOSTER
OUTPUT, ADD AN ANTI-SCALD VALVE FOR HOT
WATER SUPPLIED TO FIXTURES.
*
PIPE TO OPEN DRAIN
INSTALL IN ACCORDANCE WITH LOCAL CODES

INSTALLATION DIAGRAMS

WITH OR WITHOUT BUILDING RECIRCULATION
ONE TEMPERATURE - ONE HEATER HORIZONTAL STORAGE TANK
28