Installation & Setup Instructions - Vortex Spas Ikon Owner's Manual

Table of Contents

Advertisement

Installation and Set-Up
Instructions
Startup Directions
All Vortex Spas require a solid, flat
surface.* This is to ensure that the spa
cabinet is not exposed to a pressure
stress condition that may result in
cabinet damage and shell cracking.
A 100mm thick concrete pad is the
best example of a solid, flat surface,
however, wood decking is suitable,
provided it can withstand 415Kg per
square meter without deflection.
Failure to provide a proper, solid flat
surface may damage your spa and
void your warranty.
Please check with a licensed
contractor and local codes prior to
any construction.
It is very important to make sure that
the spa is filled at least 3/4 way up the
skimmer opening. Make sure the gate
valves are in the open or up position.
Warning: Do not run spa with gate
valves closed or run pump with no
water circulating in spa for long
periods. Damage could occur to the
spa equipment.
13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ikon and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents