Do you have a question about the Ikon and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Vortex Spas Ikon
Page 1
Owner’s Manual Australia & New Zealand Ian Thorpe OAM Olympic gold medallist...
Page 3
Owner’s Manual. In it, you will find guidelines on caring for your spa, a complete explanation of the controls, safety instructions, a troubleshooting section, and lots more. Once again, we welcome you to the family of Vortex Spa owners. Sincerely Vortex Team Vortex Spas...
To get started, please download manuals and reference materials. You can open the camera on your smart phone and scan the QR code below or visit the URL. Owner’s Manual Online Registration Download the IKON Owner’s Manual: Start your warranty coverage by https://qrs.ly/ih9omof registering here: qrs.ly/689omsw...
Topside Control Instructions Operating Instructions For operating instructions please type the following into your web browser: qrs.ly/zz9on0a Or click on the QR code below.
Your Personal Spa Record We appreciate your business and our sincere desire is that you receive years of pleasure and therapy from your Vortex Spa. Dealer Installer Date of delivery Model Serial Number...
Page 9
Safety Instructions and Warnings When installing and using this electrical equipment, basic safety precautions should be followed, including the following. Spa pool safety rules Read and follow all instructions. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent Warning: This spa pool is a heated water environment To reduce the risk of injury, do not...
Page 10
Important General Operating Instructions The following operating and maintenance instructions are very important and must be followed carefully. With proper care and maintenance your spa will provide you with years of satisfaction with minimum effort. The filtration pump should be operated for a of soaking required varies with amount of spa (acid/alkaline) limits (7.4 - 7.6 pH).
Basic Installation Information Initial start up procedure Your new portable spa must be uniformly flat and level surface. A concrete pad 100mm thick is recommended. We recommend placed on a uniformly flat and level 1. 15 amp spas are supplied with a power cord you contact your local council for up to date surface.
Lifting Instructions We recommend using a crane to set your IKON in place. Straps with a spreader bar must be used to avoid damage to the deck. If moving your IKON by hand, do not lift your IKON by the decking as it can damage the decking. Instead the cabinet panels must be removed and lifting carried out using the steel frame.
Startup Directions It is very important to make sure that the spa is filled at least 3/4 way up the All Vortex Spas require a solid, flat skimmer opening. Make sure the gate surface.* This is to ensure that the spa valves are in the open or up position.
Page 14
Startup or Refill Checklist Spa Draining Remove spa cabinet side panel (on keypad side) to Check all jets are open access equipment bay. Water flow to most jets can be turned on or off Every 90 days, depending upon water condition, you by rotating the jet face clockwise (on) or anti- may need to renew the spa water.
Page 15
Drain Instructions Inset closed position Extended closed position (pull Full extended closed position Open position for draining out to fully extended position (attach garden hose in the full (turn hose and fitting 1/4 turn and remove cap); place cap in extended closed position).
Spa Pool Maintenance Total alkalinity If you own a spa pool or hot tub, it is important to used sanitiser for spa pools is a form of chlorine understand that it requires a certain amount of owner (Lithium Hypochlorite). Ozone or UV may also be The total alkalinity should be in the range of 90 - 150 maintenance to ensure it operates properly and used, but because there can be no residual, a form of...
Page 17
Pump maintenance water will sit in the pipework and cause damage to the seals in your pumps and your heater Note: If you see water escaping from beneath your The pumps in your spa are high performance motors element and control sensors. (Damage related to spa, the barrel unions should be the first thing you that require regular checking.
Troubleshooting Situation Cause Solution Power cord unplugged Check plug connection Isolator switch OFF Check power switched ON No power to spa ELCB/RCD tripped Reset breaker in meter box Faulty power point Test another appliance from the power point Faulty control panel Contact spa dealer Water level too low Add water to spa fill mark...
Page 19
Situation Cause Solution Time not set correctly Set the clock on control pad Read control pad manual & check timer settings, consult spa dealer Sleep timers or power save settings incorrect for assistance Heating Mode set to Away or Weekend Check heating mode in control pad menu is set to normal (NORM) Will not heat Air blower ON all the time...
Cover and Panel Removal To remove the cover, simply unlock and turn the four latches. Lift and fold the cover off of the spa. The equipment bay can be accessed by removing one or more cabinet panels. The spa controller is located under the spa below the touchpad.
IKON Deck Maintenance The decking used on IKON is a synthetic material used on luxury super yachts. As such it is extremely durable and will provide years of enjoyment if these instructions are followed: • Keep the surface clean by using only water and mild detergent.
Page 22
Warnings Warning Warning Warning Children should not use spas or hot tubs without To avoid injury exercise care when entering or exiting Water temperature in excess of 40°c may be injurious adult supervision. the spa or hot tub to your health. Avertissement Avertissement Avertissement...
Page 24
Need help? Vortex Spas are distributed by Spa World in Australia and New Zealand. If you should need assistance, please contact Spa World. qrs.ly/949onb9...
Need help?
Do you have a question about the Ikon and is the answer not in the manual?
Questions and answers