Durabase; Pullout Drawers - Kenmore 795.7410 Series Use & Care Manual

DURABASE

1. To remove the Durabase, push it to the back as much
as possible. Tilt up the front of the Durabase and pull
straight out.
2. To replace, insert the Durabase in the rail assembly.
WARNING: If the Durabase divider is removed, there is
enough open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow children or pets to
touch or go near the drawer.
DURABASE DIVIDER
The Durabase divider allows you to organize the
Durabase area into sections.
USING YOUR REFRIGERATOR

PULLOUT DRAWERS

1. To remove, pull the drawer out to full extension.
Lift the front of the drawer up, then pull it straight
out.
2. To install, slightly tilt up the front and insert the
drawer into the frame and push it back into place.
29