Kenmore 795.7410 Series Use & Care Manual page 15

Replacing the Right Door
Install the right-side door first.
1 Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto
the middle hinge pin as shown in the figure.
2 Fit the hinge (1) over the hinge lever latch
and slot it into place. Rotate the lever (2)
counterclockwise to secure the hinge.
3 Connect the wire harness (1).
4 Place the cover (1) in its place. Insert and tighten
the cover screw (2).
REFRIGERATOR INSTALLATION
Replacing the Left Door
Install the left refrigerator door after the right door is
installed.
1 Make sure that the plastic sleeve is inserted in
the bottom of the door. Install the refrigerator door
onto the middle hinge.
2 Rotate the hinge lever clockwise. Lift the top hinge
free of the hinge lever latch.
Hinge Lever Latch
3 Connect all the wire harnesses.
4 Place the cover in place. Insert and tighten the
cover screw.
15