i-tec U2LAN User Manual page 7

Quick Start / USB 2.0 Ethernet adapter
PRODUCT OVERVIEW
Act/Link LED (Green)
1.
Light green: Data is link.
RJ45 connector
2.
Act/Link LED (Yellow)
3.
Yellow flashing: Data is transmitting.
USB Type-A connector
4.
DRIVER INSTALLATION
Note: DO NOT connect the Ethernet adapter to your computer before completing the
installation of driver.
*The descriptions of driver installation shown here is an example. The actual strings and
screen shots may vary slightly on each operating system.
*The driver version is subject to change due to the driver updated.
PACKAGE CONTENT
• i-tec USB 2.0 Fast Ethernet Adapter
• User Guide
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and falling to the
ground.
• Save the user manual for a possible use later.
n cooperation with the service department:
I
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this product.
EN
7