Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Schertler Arthur Prime Series
Summary of Contents for Schertler Arthur Prime Series
- Page 1 arthur PRIME SERIES USER MANUAL...
-
Page 2: Electrical Safety
INTRODUCTION AND IMPORTANT SAFETY INFORMATION Thank you for choosing Arthur Prime. The Prime mixer series has been specially developed to produce outstanding audio results in a more compact format, while offering a range of input options to suit the way you want to work. To make the most of your Arthur Prime and to ensure trouble-free operation, please read this manual carefully before using the mixer for the first time. -
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION Avoid installing your mixer near any heat sources such as radiators, heat registers, stoves, or other heat producing apparatus (including amplifiers). Do not put any sources of open flame (e.g. candles or pyrotechnics) on or near your mixer. Do not cover your mixer during use, or obstruct the ventilation flow in any way. -
Page 4: Product Overview
PRODUCT OVERVIEW ABOUT THE PRIME SERIES The Prime mixer series is based on the same technology used in our flagship ARTHUR mixer, guaranteeing best possible sound quality. The same high-quality preamps are found on the input channels, the same hi-voltage (48V) power supply offers superior headroom and the same No Negative Feedback (NFB) structure gives a fast response and natural attack. - Page 5 = not depressed (bypassed). 6. 10V: This button delivers the necessary 10-volt supply for all SCHERTLER electrostatic pickups (STAT- and BASiK series), enabling direct connection to the YELLOW/instrument input without using the pickup’s original preamp. The button can also be used for connecting unbalanced electret microphones to the instrument input.
- Page 6 PRODUCT OVERVIEW - MIC INPUT CHANNEL Mic input channels have 3-band EQ 8. HI: This knob lets you tune the high range of the audio spectrum (4.5kHz upwards) from +/- 15dB with a slope of 18dB / octave. The 3rd order structure “keeps”...
- Page 7 PRODUCT OVERVIEW - LINE CHANNEL The “stereo” line channel effectively consists of two independent mono channels, each with their own controls. It can either be used as a stereo input or as 2 x mono inputs. 1. LINE INPUTS: These are two fully balanced inputs, which use space-saving phone plugs.
- Page 8 PRODUCT OVERVIEW - MASTER SECTION This section description starts in reverse to show the signal flow options from arrival to the various outputs. 15. LEFT/RIGHT MASTER FADERS: Depending on their position, the two L and R master faders attenuate or amplify the combined L and R signals arriving from all the input channels.
- Page 9 PRODUCT OVERVIEW - MASTER SECTION 7. REVERB TO AUX 2: This sends reverb out, for example, to a stage monitor if musicians want to include reverb in their monitor mix (see Aux Outs below). AUX OUTS – USING EXTERNAL EFFECTS AND MONITORS External effects units and monitors can be connected to the Master section’s two Aux Outs (balanced jack...
- Page 10 TECHNICAL INFORMATION - SPECS Input impedance 4.7 kohm 592 kohm YELLOW 37.2 kohm LINE Maximum output level (through L/R) 30 dBu Sensitivity (according to gain) -59 dBu to -16 dBu -41 dBu to 0 dBu YELLOW -17 dBu to 18 dBu LINE Frequency response <10 Hz to 57 kHz...
- Page 11 TECHNICAL INFORMATION - SIGNAL FLOW...
-
Page 12: Warranty
COPYRIGHT This manual is the property of Schertler S.A. and, as such, is subject to Swiss copyright law. No part of this manual should be reproduced, edited or distributed without prior consent from Schertler.
Need help?
Do you have a question about the Arthur Prime Series and is the answer not in the manual?
Questions and answers