Related Manuals for Schertler ARTHUR PRIME Series
Summary of Contents for Schertler ARTHUR PRIME Series
- Page 1 ARTHUR • U S E R • M A N U A L P R I M E S E R I E S - A N A L O G D E S K T O P M I X E R V1 EN W W W .
- Page 2 INTRODUCTION The PRIME mixer series is based on the same technology used in SCHERTLER’s ARTHUR Format 48 mixer, guaranteeing best possible sound quality. The same high-quality preamps are found on the input channels, the same hi-voltage (48 V) power supply offers superior headroom, and the same No Negative Feedback (NNFB) structure gives a fast response and natural attack.
-
Page 3: Important Safety Information
Your mixer does not contain any “user serviceable” parts. Servicing and/or repairs should only be carried operate normally, or has been dropped, please call your nearest SCHERTLER technical assistance center. out by qualified personnel. See MAINTENANCE AND REPAIR (below). -
Page 4: Power Supplies
POWER SUPPLIES STARTING THE MIXER Plug the power supply’s connection cable into the ARTHUR PRIME’s DC IN connector (see page 10). ARTHUR The ARTHUR PRIME mixer receives its electrical energy through an external power supply. Although you has no on/off switch: when your mixer is not in use, its power supply should be disconnected. may be happy with the power supply provided with your mixer, here is a general overview of the different Note: The linear power supplies can be switched on or off using the on/off switch on the power supply itself. - Page 5 14. MUTE: To exclude this channel signal from the L/R MASTER mix without changing the fader position, simply press the MUTE button. 6. 10V: This delivers the necessary 10 V supply for all SCHERTLER electrostatic pickups (STAT and BASiK Series). It enables the pickup to be directly connected to the YELLOW instrument input without using its 15.
-
Page 6: Line Channels
The “stereo” line channel effectively consists of two independent mono channels, each with their own AUX 1 OUT for the use of external effects (see Master Section, 2). controls. It can either be used as a stereo input or as 2 x mono inputs. 4. -
Page 7: Master Section
This section description starts in reverse to show the signal flow options from arrival to the various outputs. 15. LEFT/RIGHT MASTER FADERS: Depending on their position, the left and right master faders attenuate or amplify the combined L and R signals arriving from all the input channels. These resulting signals can be 7. -
Page 8: Signal Flow
SIGNAL FLOW TECHNICAL INFORMATION Weight 2.2 kg Dimensions (LxDxH) 22.6 x 37 x 6 cm Construction Anodized aluminum assembled box Total gain 73 dBu Pad (attenuation) Max input level +4 dBu (mic) +21 dBu (Yellow input) Mic In connector Mic In sensitivity -59 to -15 dBu Mic In impedance 4.7 kΩ... - Page 9 Weight 3.2 kg Weight 4.2 kg Dimensions (LxDxH) 33 x 37 x 6 cm Dimensions (LxDxH) 42 x 37 x 6 cm Construction Anodized aluminum assembled box Construction Anodized aluminum assembled box Total gain 73 dBu Total gain 73 dBu Pad (attenuation) Pad (attenuation) Max input level...
-
Page 10: Warranty
COPYRIGHT directly connected to the mixer, a DI would not be This manual is the property of SCHERTLER SA and, as such, is subject to Swiss copyright law. No part of needed here. this manual should be reproduced, edited or distributed without prior consent from SCHERTLER. - Page 11 VIA BEROLDINGEN 18 A C O U S T I C 6850 MENDRISIO SWITZERLAND · A U D I O · T +41 (0) 91630 0710 F +41 (0) 91630 0711 P R O D U C T S INFO@SCHERTLER.SWISS WWW.SCHERTLER.COM...
Need help?
Do you have a question about the ARTHUR PRIME Series and is the answer not in the manual?
Questions and answers