Maintaining And Cleaning The Control Box; Guarantee; Disposal - Waeco MW-SSC-01 Operating Manual

_MW-SSC-01.book Seite 19 Donnerstag, 27. September 2007 4:31 16
MagicWatch
7.2 Setting
Caution!
Because the vehicle must be moved during the programming process, get a
second person to help you.
For the parking aid or warning system connected to the control box to function
ideally, you should set a reference value of around walking speed (less than
5 km/h).
➤
Start the vehicle and drive at walking speed.
➤
Press the memory button (6 1, page 5).
✓
The control box stores the speed as a reference value for activating the control box.
When the vehicle speed falls below this set value, the red LED (5 2, page 4) glows.
8

Maintaining and cleaning the control box

Caution!
Do not use sharp or hard objects to clean the device as these may damage
the sensors.
➤
Clean the control box with a damp cloth from time to time.
9

Guarantee

Our general guarantee conditions apply. If the product is defective, please return it to the
WAECO location in your country (see the back of the instruction manual for the address-
es) or to your dealer. For repair and guarantee processing, the following documents must
be sent along with the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
10

Disposal

➤
Place the packaging material in the appropriate recycling waste bins wherever pos-
sible.
If you wish to finally dispose of the device, ask your local recycling centre or
specialist dealer for details about how to do this in accordance with the appli-
cable disposal regulations.
Maintaining and cleaning the control box
19