Display Explanations - HoMedics Walgreens BPA-450WGN Manual

DISPLAY EXPLANATIONS

Original Document Name: AM-LD-01-V6
Date/Time Indicator
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
9
Display Symbols:
User 1: Appears when the monitor is operated by User 1.
User 2: Appears when the monitor is operated by User 2.
Weak Battery Symbol: Appears when batteries should be
replaced.
Pulse Symbol: Shows the pulse rate per minute.
Important Health Bulletin: See page 21 for more information.
Risk Category Indicator: Compares readings against blood
pressure guidelines. See page 20 for more information.
Memory Select: Identifies memory mode. See page 22 for
(No Symbol)
more information.
If any of the following letters and numbers appear in the area that MEMORY
SELECTOR
diastolic pressure should be displayed, an error has occurred
with your reading. See Troubleshooting section of this manual for
more information.
Measurement Error: Measure again. Wrap the cuff
START
MEM
correctly and keep arm steady during measurement.
STOP
Measurement Error: Measurement result exceeds
measurement range. Measure again.
Air Circuit Abnormality: Check cuff connection. Measure again.
Pressure Exceeding 300 mmHg: Turn the unit off to clear,
then measure again.
Data Error: Remove and reload the batteries.
Recalibration Alert: Recalibration recommended. See
page 25 for information.
10