Care, Maintenance & Cleaning - HoMedics Walgreens BPA-450WGN Manual

CARE, MAINTENANCE & CLEANING
1. Do not apply excessive pressure (push back) on dis-
play when it is in the full upright position.
2. Clean the blood pressure monitor body and cuff
carefully with a slightly damp, soft cloth. Do not
press. Do not wash cuff or use chemical cleaner on
it. Never use thinner, alcohol or petrol (gasoline) as
cleaner.
3. Leaky batteries can damage the unit. Remove the
batteries when the unit will not be used for
a long time.
4. If the unit is stored near freezing, allow it to
acclimate to room temperature before use.
5. This blood pressure monitor is not field service-able.
You should not use any tool to open the device nor
should you attempt to adjust anything inside the
device. If you have any problems with this device,
please contact HoMedics Consumer Relations (con-
tact information can be found on the warranty page).
6. Do not immerse the unit in water as this will result in
damage to the unit.
7. Do not subject the monitor and cuff to extreme tem-
peratures, humidity, moisture, and direct sunlight.
Protect from dust.
8. Do not fold the cuff and tubing tightly.
9. Do not disassemble the monitor or cuff. If in need of
repair, refer to the warranty section of this manual.
27
10. Do not subject the monitor to extreme shocks (do
not drop on floor).
11. Do not inflate the cuff unless wrapped around arm.
12. Do not wrap the cuff around body parts other than
your arm.
13. Do not drop or insert any object into any opening
or hose.
14. This monitor may not meet its performance
specifications if stored or used outside of these
temperature and humidity ranges:
• Storage Environment
Temperature:
14°F~140°F (-10°C~60°C)
Humidity:
10~90% RH max.
• Operating Environment
Temperature:
50°F~104°F (10°C ~40°C)
Humidity:
40~85% RH max.
28