Advertisement
11.
Shift Knob Cap
Shifting will be easier if the supplied shift knob cap is mounted (p.19).
However, note that for EOS cameras with a built-in flash, the cap may come in contact with the
camera when mounting/detaching the lens, shifting the lens, or turning the lens for rotation.
Screw (length: 3 mm)
Shift knob cap
Be sure to fix the cap in place using the supplied screw (length: 3 mm).
O
O
The removed screw (length: 2.2 mm) cannot be used to fix the cap in place. Store the removed screw, as it
O
O
will be required when not using the cap.
Use a precision screwdriver (Phillips).
O
O
Do not turn the shift knob forcefully. This may cause malfunction.
O
O
Remove the shift knob
screw.
Mount the cap by squeezing it onto
the shift knob, and then fix it in
place using the supplied screw.
ENG-30
Advertisement
