Spinner ® Pro / Elite / Nxt Assembly And Setup - Star Trac Spinner, Spinner Pro, Spinner Elite, Spinner NXT V-bike Spinner Spinner Pro Spinner Elite Spinner NXT Owner's Manual

Star trac v-bike spinner spinner pro spinner elite spinner nxt owner's guide
Hide thumbs Also See for Spinner, Spinner Pro, Spinner Elite, Spinner NXT V-bike Spinner Spinner Pro Spinner Elite Spinner NXT:
Table of Contents

Advertisement

SPINNER
PRO / ELITE / NXT ASSEMBLY AND SETUP
®
Use the following procedures to unpack and assemble your
U
NPACKING
Prepare the area that you will be unpacking and assembling the bike to be free from debris that may cause damage. Observe all safety precautions and
care while unpacking and assembling the bike. Position the shipping carton so the "Heavy End" logo is located at the bottom. Open the top of the
carton and fold back all four flaps. Carefully tilt the box forward so that the box may be lifted to expose the cycle. Remove all parts from the shipping
carton and foam inserts, and verify that the following parts are included in your shipment:
Assembly Parts (Spinner Pro shown)
NXT Parts List (not shown)
Description
Main Frame Assembly
Handlebar Post
Handlebar w/ Grip & Water Bottle Holders
M8x1.25, 16mm Flat Head Screw
M8x1.25, 16mm Socket Set Screw
Seat Post
Seat Slider Assembly w/ Saddle
Pedals (set of two)
Front Leg Assembly w/ Transport Wheels
Pro/Elite Parts List (Pro shown above)
Description
Main Frame Assembly (not shown)
Handlebar w/ Grip (& Water Bottle Holders
– Elite only) (not shown)
A. Seat Slider Assembly, w/ Saddle
B. Seat Post
C. Rear Leg Assembly
D. Front Leg Assembly w/ Transport Wheels
E. Pedals (set of two)
Spare Parts Kit- Save the box of spare parts in a safe place so you have service parts when needed in the future.
Page 7
STAR TRAC SPINNER ®.
Spare Parts Kit
Qty.
Description
1
Rear Leg Assembly
1
M10x1.5, 55mm Button Head Screw
1
M10x1.5, 65mm Button Head Screw
2
M10x1.5 Nyloc Hex Nut
1
10mm Washer, Flat
1
Wrench Hex, 5mm
1
Wrench Hex, 4mm
1
Multi Wrench
1
Spare Parts Kit (USA Only)
brake pad, pedal straps)
Qty.
Description
1
F. Water Bottle Cages
1
G. Pop-Pins (pre-installed)
G. M10x1.5, 55mm Flat Head Screw
1
G. M10x1.5 Nut
1
G. 10mm Washer, Flat
1
G. Wrench Hex, 5mm
1
G. Wrench Hex, 4mm
1
G. Multi Wrench
H. Spare Parts Kit (USA Only)
brake pad, pedal straps)
STAR TRAC GROUP CYCLES OWNER'S GUIDE
Qty.
1
4
4
8
16
1
1
1
1
(includes saddle,
Qty.
2
3
4
4
4
1
1
1
1
(includes saddle,

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V-bike spinnerSpinner nxt

Table of Contents