Advertisement
Available languages
Available languages
InstructIon sheet cont...
10. Turn on the red-dot finderscope. To
conserve battery life, be sure to turn it
off when not in use.
13. Focus your telescope by turning the two
knobs under the eyepiece until you have
a sharp image.
Solar WarNING: Never attempt to view the sun through
any telescope without a proper solar filter.
11. Loosen the clutch knob to free up the
azimuth (left & right) axis.
12. Turn the panning handle of the mount
counterclockwise to loosen the altitude
(up & down) clutch. Use the pan handle
to move the telescope until your target
appears in the finderscope. When you
have your target in the field of view of the
telescope eyepiece, tighten the altitude
lock nut.
For general usage information, please visit www.celestron.com.
If you have questions or problems with setup, please contact
Celestron Technical Support: 310.803.5955
This product is designed and intended for use by those 14 years of age and older.
Product design and specifications are subject to change without prior notification.
©2013 Celestron
Celestron and Symbol are trademarks of Celestron, LLC. All rights reserved.
2835 Columbia Street • Torrance, CA 90503 U.S.A
Advertisement
