1. Manuals
  2. Brands
  3. Celestron Manuals
  4. Telescope
  5. Cometron FirstScope 76
  6. Quick setup manual

Celestron Cometron FirstScope 76 Quick Setup Manual

Tabletop telescope
Hide thumbs Also See for Cometron FirstScope 76:
Table of Contents
  • Guide D'installation Rapide
  • Kurzanleitung zur Einrichtung
  • Ausrichtung des Sucherfernrohrs
  • Guida Rapida
  • Guía de Instalación Rápida

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

Download this manual
Q U I C K S E T U P G U I D E
FINDERSCOPE
OPTICAL TUBE
3
Loosen the thumbscrews on the focuser and remove the focuser cap.
6
Loosen the altitude lock nut by turning it clockwise and hold the
bottom of the tube with your other hand.
9
Focus your telescope by turning the two knobs under the eyepiece
until you have a sharp image.
1
#21023
1 1
EYEPIECE
FOCUS KNOB
TUBE END
ALTITUDE LOCKING NUT
Verify that all parts are present. Your Cometron FirstScope 76
PREASSEMBLED BASE
telescope includes the preassembled base, optical tube, fi nderscope
assembly, and two eyepieces.
4
Insert the chrome barrel of the eyepiece into the focuser and secure
with setscrews.
7
Look through the fi nderscope and roughly point your telescope at your
target.
NOTE: Align the fi nderscope fi rst before proceeding. See the next
page for directions.
Celestron's free SkyPortal app for iOS and Android can
help you locate and identify a wide array of celestial
objects quickly and easily.
2
To install the fi nderscope, remove the nuts on side of tube, place the
fi nderscope bracket over threaded posts and replace the nuts.
5
Remove main telescope lens cap and caps on the fi nderscope.
8
Center your target in the fi nderscope's fi eld of view. Then make sure
it is in the telescope eyepiece's fi eld of view and tighten the altitude
lock nut.
© 2022 Celestron • All rights reserved • celestron.com/pages/technical-support
2835 Columbia Street • Torrance, CA 90503 U.S.A.
celestron.com/pages/warranty
SOLAR WARNING: Never attempt to view the sun through any
telescope without a proper solar fi lter.
NEED ASSISTANCE?
Contact Celestron Technical Support
celestron.com/pages/technical-support
Printed in China
09-22

Advertisement

Table of Contents
loading

Related Manuals for Celestron Cometron FirstScope 76

Summary of Contents for Celestron Cometron FirstScope 76

  • Page 1 OPTICAL TUBE TUBE END ALTITUDE LOCKING NUT Verify that all parts are present. Your Cometron FirstScope 76 To install the fi nderscope, remove the nuts on side of tube, place the PREASSEMBLED BASE telescope includes the preassembled base, optical tube, fi nderscope fi nderscope bracket over threaded posts and replace the nuts.
  • Page 2 ALIGNING THE FINDERSCOPE 20mm Eyepiece The finder is one of the most important parts of your telescope. It Focus Knobs helps you locate objects and center them in the eyepiece. The first time you assemble your telescope, you need to align the finder to the telescope’s main optics.

  • Page 3: Guide D'installation Rapide

    Pour installer le chercheur, retirez les écrous sur le côté du tube, BASE PRÉASSEMBLÉE Cometron FirstScope 76 est livré avec la base préassemblée, le tube placez le support du chercheur sur les deux supports à vis et remettez optique, l’assemblage du chercheur et deux oculaires.
  • Page 4 ALIGNER LE CHERCHEUR Oculaire de 20 mm Le chercheur est l'un des composants les plus importants de votre Molettes de mise au point télescope. Il vous aide à localiser des objets et à les centrer dans votre oculaire. La première fois que vous assemblez votre télescope, vous devez aligner le chercheur avec le système optique principal du télescope.

  • Page 5: Kurzanleitung Zur Einrichtung

    Rändelmutter zur Höheneinstellung fest. anderen Hand fest. fortfahren. Anweisungen fi nden Sie auf der nächsten Seite. © 2022 Celestron • Alle Rechte vorbehalten • celestron.com/pages/technical-support 2835 Columbia Street • Torrance, CA 90503 U.S.A. celestron.com/pages/warranty SONNENSTRAHLEN-WARNHINWEIS: Niemals ohne einen vorschriftsmäßigen Sonnenfi lter durch ein Teleskop in die Sonne...

  • Page 6: Ausrichtung Des Sucherfernrohrs

    AUSRICHTUNG DES 20-mm-Okular SUCHERFERNROHRS Das Sucherfernrohr ist eines der wichtigsten Teile Ihres Teleskops. Es hilft Ihnen, Objekte zu suchen und im Okular zu zentrieren. Wenn Fokussierknöpfe Sie Ihr Teleskop zum ersten Mal zusammenbauen, müssen Sie das Sucherfernrohr auf die Hauptoptik des Teleskops ausrichten. Am besten tun Sie dies tagsüber.* * SONNENSTRAHLEN-WARNHINWEIS! WÄHLEN SIE EIN ZIEL...

  • Page 7: Guida Rapida

    NOTA: allineare innanzitutto il cercatore prima di procedere. Vedere la pagina successiva per le istruzioni. telescopio e serrare il dado di blocco dell’altezza. © 2022 Celestron • Tutti i diritti riservati • celestron.com/pages/technical-support 2835 Columbia Street • Torrance, CA 90503 Stati Uniti celestron.com/pages/warranty AVVERTENZA SOLARE: Non tentare mai di osservare il sole attraverso un telescopio senza un fi ltro solare adeguato.
  • Page 8 ALLINEAMENTO DEL CERCATORE Oculare 20mm Il cercatore è uno dei componenti più importanti del telescopio. Aiuta a Manopole di messa localizzare gli oggetti e a centrarli nell'oculare. Al primo assemblaggio a fuoco del telescopio è necessario allineare il cercatore con le ottiche principali del telescopio.

  • Page 9: Guía De Instalación Rápida

    Para instalar el localizador, saque las roscas del lateral del tubo, BASE PREMONTADA Cometron FirstScope 76 incluye la base premontada, tubo óptico, coloque el soporte sobre los postes estriados y vuelva a colocar las estructura del localizador, y dos oculares.
  • Page 10 ALINEAR EL LOCALIZADOR Ocular de 20mm Mandos de El localizador es una de las piezas más importantes de su telescopio. Le ayuda a localizar objetos y centrarlos en el ocular. La primera vez enfoque que monte el telescopio, deberá alinear el localizador con la óptica principal del telescopio.

This manual is also suitable for:

21023

Table of Contents