Celestron 44300 Information, Specifications And Instructions page 11

AMCap is mainly a software program for taking videos but you can use AMCap for snapshot images but it is done one image at
a time. In other words, you preview and focus the object you choose and then push "click" on the microscope and the image
will be taken. Then, you need to save the image and when done you can take and save another image.
For imaging single shots (snapshots), it is better to use other imaging software. Normally some programs are included when
you purchased your computer or you may have purchased specialized software imaging programs you can use. From "Choose
Application" you can pick which program to use.
If you do not have any programs to choose from, there is another way to make snapshots easier on most computers. You can go
to "Control Panel" and find "Scanners and Cameras". You will see "Envision V-Cam" and double click on it.
The green light at the top of the HDM will come on indicating it is ready
to use.
11