Advertisement
PRODUCT ORIENTATION
Power indicator
PRE-OPERATING INSTRUCTIONS
1. Carefully remove heater from box. (Please save box for off season storage).
2. Attach the handle using the screws provided.
3. Make sure the heater is switched OFF before plugging the heater into the outlet. Connect
to properly grounded outlets only. NOTE: The power cord has a polarized plug (with one
blade wider than the other) that will only fit one way in a polarized outlet. If it does not insert
easily try reversing the plug. If it still does not fit contact your electrician to replace your
outlet. DO NOT defeat the safety purpose of the polarized plug.
4. Place heater only on a firm level surface, free from obstructions and at least 3
ft. away from any wall or other objects such as curtains, plants, etc.
5. Avoid overloading your circuit by not using other high wattage appliances in the same
outlet.
OPERATION INSTRUCTIONS
1. Completely uncoil the cord and plug heater directly into a 110-120V grounded AC wall
outlet. Be sure the plug fits tightly. A loose fit will cause overheating and damage the plug.
Plug and cord may feel warm during normal useage.
2. Choose your power setting:
High, Low, Fan or OFF. Use the HIGH setting to warm the room quickly. After your comfort
level has been achieved you may want to switch to the LOW setting to conserve electricity.
3. Thermostat: Turn to the highest setting until room is comfortable. Then slowly rotate the
knob counter clockwise (left) until the heater cycles OFF. At this SET POINT the heater with
cycle on and off to maintain this comfort level.
A296
DO NOT COVER
5
Alarm indicator
Rotary switch button
Thermostat button
www.tsicustomerservice.com
Advertisement
