Where Shall We Put It - Star Micronics NX-10 User Manual

CHAPTER 1
SETTING UP YOUR
PRINTER
Subjects we'll cover in Chapter 1 include-
. Choosing a suitable place for your printer;
l
Unpacking your new printer;
l
Setting it up.
WHERE SHALL WE PUT IT?
Before you do anything else, give some thought to where
you'll be using your printer. Obviously, it will be somewhere
near your computer. And both printer and computer will lead
longer, healthier lives if they like their surroundings. For in-
stance, we recommend.. .
,
l
Using the printer on a flat surface.
l
Keeping it out of direct sunlight and away from heat-
producing units.
l
Using it only in temperatures where you are comfortable.
l
Avoiding areas with a lot of dust, grease, or humidity.
l
Giving it "clean" electricity. Don't connect it to the same
circuit used by large, noise-producing appliances (such as
refrigerators).
l
The line voltage should be the same voltage that's
specified on the identification plate - within 10% of the
recommended voltage.