Layout And Space Recommendations; Securing The System - EMC Symmetrix DMX-3 Product Manual

Planning and Installation
Layout and space
recommendations

Securing the system

286 EMC Symmetrix DMX-3 Product Guide
CAUTION
!
The customer must make sure the site meets or exceeds the
specifications listed.
Layout and space considerations are found in
options" on page
WARNING
"Floor load-bearing requirements" on page 295
floor load-bearing requirements. Failure to comply with these
requirements could result in severe damage to the Symmetrix DMX-3
system, the raised floor, the subfloor and the surrounding
infrastructure.
WARNING
Before the Symmetrix DMX-3 bays are rolled into position in the
computer room, note how close the wheels are to the edge of the
cutout. If the Symmetrix system needs to be relocated, contact the
EMC Customer Support Center.
WARNING
When moving the storage bay down an incline, the rear of the cabinet
must go first.
When moving the storage bay up an incline, the rear of the bay must
go last.
If the system is to be secured to the floor for increased stability, use
Symmetrix DMX-3 Secure bracket kits. Contact your EMC Sales
Representative for more information.
293.
"System placement
defines important