Vigan Mammoth ELP4V1 User Manual page 23

Electric multifunctional weed burner
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 20
SAFETY INSTRUCTIONS FOR WEED BURNER
• If you use a weed burner, you must use an extension tube and a handle. Hold the device firmly by the handle.
• Check that the extension bar and handle are firmly attached to the device and that the device is switched off.
• Keep the power cord away from the hot-air nozzle.
• Do not hold the nozzle too close to the place you are working on. If the air gets too hot, it can damage the unit.
• Careless use of this device may cause fire.
• Always check the plants you burned. If they smolder, they may later start to burn and cause a fire.
• Be careful when working with the device near flammable materials, liquids, gases or dust.
• When operating the unit, make sure that children and animals are not around.
• Do not aim at the same place for too long.
• Do not use this unit in explosive atmospheres or environment.
• Heat can be transferred to flammable materials that are hidden from your view.
OTHER SAFETY INSTRUCTIONS
CAUTION! Prevent the risk of fire injury as well as safety risks:
In the event of danger, unplug the power cord of this unit from the socket outlet immediately.
Turn off the device immediately if you notice:
• The plug and / or the power cord are defective or damaged.
• The control switch has a fault.
• You smell or see smoke caused by burned insulation, or it is coming out of another part of the hot air gun.
CAUTION! RISK OF INJURY!
• Do not use this appliance as a replacement for the hairdryer.
• Do not aim at hot air on people or animals.
• Do not look directly at the nozzle outlet.
CAUTION! RISK OF BURNS!
• Do not touch the hot nozzle.
• Wear protective gloves.
• Wear safety goggles.
• During breaks, when adjusting the appliance (eg changing the nozzle) and when you have finished working, always
unplug the appliance.
• Before changing the nozzle, allow the unit to cool completely.
• Do not hold the nozzle too close to the place or object you are working on. If the air gets too hot, it can damage the unit.
• Always keep the unit clean, dry and free from any grease on the surface.
• Do not use the device for any purpose other than what it is designed for.
23
str

Advertisement

Table of Contents
loading

Related Products for Vigan Mammoth ELP4V1

Table of Contents