Vigan Mammoth ELP4V1 User Manual page 22

• Never leave the device turned on, never leave it unattended.
• Do not immerse any part of the appliance in water or other liquid, do not clean the appliance under running water.
• If any appliance has damaged any part of the power cord or is damaged or malfunctioned, do not use it and contact
a qualified service center.
• The appliance with a damaged power cord or plug of a network cable is forbidden to use.
• Damaged or tangled cables increase the risk of electric shock.
• To avoid potential risk, the damaged power cord must be replaced by the manufacturer, a qualified person or an
authorized service center.
• Only genuine spare parts may be used in the case of service work by a qualified person. This ensures the safety of the
power tool.
• The plug and power cord may only be replaced by the manufacturer of this power tool or its authorized service facility.
This ensures the safety of the power tool.
• The device and the power cord must not come into contact with the hot surface or lead over sharp edges.
• Do not handle the power cord with wet hands. Do not pull on the wire, hold it behind the plug when disconnecting it.
It could damage the power cord or socket
• Do not use power tools unless they can be switched on and off. If the power tool cannot be operated with a switch, it
is dangerous and needs to be repaired.
• Do not use the device in very dry places or in their close proximity because of the risk of fire.
• To avoid electric shock, do not repair the appliance yourself or modify it in any way. Have all repairs of this appliance
carried out by a specialist workshop.
• Design changes, disassembly of parts, or the use of other non-original parts that have not been approved by the man-
ufacturer are prohibited and could affect the functionality of the device and could result in the risk of injury or damage.
• Incorrect interference with the appliance during the warranty period will expose you to the risk of losing any warranty.
SAFETY INSTRUCTIONS FOR HOT AIR GUN
• Make sure the switch is off before connecting the appliance to the power supply.
• Keep the power cord in all circumstances out of the nozzle of the hot air gun.
• You may cause a fire by improper use of the device.
• Be careful when working with the device near flammable materials.
• When operating the unit, make sure that children and animals are not around.
• Do not aim the hot air gun on the same place for too long.
• Do not use a hot air gun in an explosive atmosphere or environment.
• Heat can be transferred to flammable materials that are hidden from your view.
• After use, place the gun on the stand and allow it to cool down before storing it.
• Do not leave the unit unattended during operation.
• Keep all parts of your body at a safe distance from the heating nozzle. Do not touch it unless it is cold. Always hold and
carry the device using the handle.
SAFETY INSTRUCTIONS FOR SOLID FUEL LIGHTER
– charcoal, briquettes and wood in grills and fireplaces
• Make sure the switch is off before connecting the appliance to the power supply.
• Keep the power cord in all circumstances out of the nozzle of the hot air gun.
• You may cause a fire by improper use of the device.
• Check that the solid fuel is in the correct position.
• Disconnect the appliance from the power supply before removing it from the fire.
• Ensure that the device has cooled before storing.
• The power cord and other flammable materials must not come in contact with the hot parts of the lighter.
• Do not leave the unit unattended during operation.
• Always hold and carry the device using the handle.
22
str