Star Micronics LC-1021 User Manual page 59

Problem
Printer does not feed paper
properly.
Line spacing is incorrect.
Lines print over each other.
Possible Cause
Jamming paper.
The printer is not set up
correctly for the thickness of
paper being used.
Jamming paper.
The line spacing or leading
selected in your application
program is wrong.
Auto line feed with carriage
return is enabled.
Auto line feed with carriage
return is disabled.
Jamming paper.
Troubleshooting guide
Recommended Action
Remove all paper from the
printer and then reload it.
Set up the printer for the
paper thickness you are
using. See "Adjusting for
paper thickness" on
page 42.
Set up the printer for the
paper thickness you are
using. See "Adjusting for
paper thickness" on
page 42.
Choose a different line
spacing or leading setting
from your application.
Use the EDS Mode to
disable auto line feed with
carriage return. See "Switch
4: Auto LF with CR" on
page 32.
Use the EDS Mode to
enable auto line feed with
carriage return. See "Switch
4: Auto LF with CR" on
page 32.
Set up the printer for the
paper thickness you are
using. See "Adjusting for
paper thickness" on
page 42.
53