Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for NEFF EXTRACTOR HOOD
Summary of Contents for NEFF EXTRACTOR HOOD
- Page 1 EXTRACTOR HOOD [en] Instructions for installation and use...
-
Page 3: Table Of Contents
2000 metres above sea Additional information on products, accessories, replacement parts and services can be found at level. www.neff-international.com and in the online shop This appliance may be used by children over www.neff-eshop.com the age of 8 years old and by persons with... - Page 4 Switch off In combination with an activated vapour the hotplate. Extinguish flames carefully extractor hood, room air is extracted from the using a lid, fire blanket or something similar. kitchen and neighbouring rooms - a partial vacuum is produced if not enough fresh air is Warning –...
-
Page 5: Important Safety Information
Important safety information Causes of damage Warning – Risk of injury! Risk of trapping body parts when opening and Caution! closing the glass front. Do not reach into the Risk of damage due to corrosion. Always area behind the glass panel, and keep your switch on the appliance while cooking to avoid fingers away from the hinges. -
Page 6: Environmental Protection
■ Note: The exhaust air must not be conveyed into a supply of air to enable the extractor hood to work functioning smoke or exhaust gas flue or into a shaft efficiently and with a low level of operating noise. -
Page 7: Operating The Appliance
It is possible that individual features are described which do not apply to your appliance. Note: Switch on the extractor hood when you start cooking and switch it off again several minutes after you have finished cooking. This is the most effective way of removing the kitchen fumes. - Page 8 In automatic mode, an automatic air sensor in the (filters that can be regenerated). Take your finger off extractor hood detects the intensity of the cooking and symbol. This will switch the electronic roasting odours. Depending on the setting of the...
- Page 9 ˜ Touch the symbol to set a different fan setting. mode ˜‚ Switching off Note: After approx. 6 minutes, the extractor hood automatically switches back to fan setting 3. Touch the symbol. Switching off Noise reduction function If you want to end intensive mode before the preset time expires, touch the ˜...
- Page 10 In automatic mode, an automatic air sensor in the should now be cleaned or the activated charcoal filter extractor hood detects the intensity of the cooking and replaced. ~ "Cleaning and maintenance" on page 14 roasting odours. Depending on the setting of the...
-
Page 11: Connecting To A Hob
Home Connect If the extractor hood is being operated by means of ■ Two appliances can be connected using the the controls on the hood itself, this mode of Home Connect app provided that both of them are operation always has priority. -
Page 12: O Home Connect
Note: If the extractor hood has been unable to If the appliance is not connected to your home network, connect, it will automatically allow you to manually it will function as an extractor hood with no network connect to your home network. ƒ... - Page 13 If the Home Connect app is installed on your mobile When your appliance is connected for the first time to a device, you can connect it to your extractor hood. WLAN network, which is connected to the Internet, your appliance transmits the following categories of data to...
-
Page 14: Cleaning And Maintenance
Cleaning and maintenance 2Cleaning and maintenance Aluminium and plastic Hot soapy water: Clean with a soft cloth. Glass Glass cleaner: Warning – Risk of burns! Clean with a soft cloth. Do not use a glass C l e a n i n g a n d m a i n t e n a n c e The appliance becomes hot during operation. -
Page 15: Trouble Shooting
Trouble shooting Notes 3Trouble shooting Do not use aggressive, acidic or alkaline cleaning ■ products. We recommend cleaning the grease filters every 2 M alfunctions often have simple explanations. Please ■ months. T r o u b l e s h o o t i n g read the following notes before calling the after-sales When cleaning the metal grease filters, also clean ■... -
Page 16: Customer Service
Customer service Accessories 4Customer service (not included in the scope of delivery) W hen calling us, please quote the product number Note: These instructions apply to several appliance C u s t o m e r s e r v i c e (E no.) and the production number (FD no.) so that we models. -
Page 17: Installation Instructions
I n s t a l l a t i o n i n s t r u c t i o n s I nstallation instructions This appliance is installed on the wall. ■ If the extractor hood is to be operated in exhaust-air ■ mode, a flue duct must be fitted. - Page 18 The surfaces of the appliance are easily damaged. Avoid damaging them during installation. The width of the extractor hood must correspond at least with the width of the hob. For the installation, observe the currently valid building regulations and the regulations of the local electricity and gas suppliers.
-
Page 19: Important Safety Information
(e.g. a chimney). the electrical or mechanical assembly. In combination with an activated vapour extractor hood, room air is extracted from the Warning – Hazard due to magnetism! kitchen and neighbouring rooms - a partial Permanent magnets are inserted in the vacuum is produced if not enough fresh air is appliance front. -
Page 20: General Information
Never allow children to play with packaging other structures (e.g. plasterboard, porous concrete, material. poroton bricks). The maximum weight of the extractor hood is 40 kg. ■ Electrical connection Warning – Risk of electric shock! Components inside the appliance may have sharp edges. -
Page 21: Installation
Ensure that there are no electrical wires, gas pipes or water pipes in the area where holes are to be drilled. If the extractor hood is to be operated in exhaust-air mode, a flue duct must be fitted. If the extractor hood is to be operated in air-recirculation mode, an optional accessory must be fitted. - Page 22 Fitting with a flue duct Fitting without a flue duct Installation Screw in the mounting supports for the extractor hood until they are hand-tight, use a spirit level to level the appliance and then screw the mounting supports in fully.
- Page 23 The flue duct does not need to be fitted for air- recirculation mode. Note: If an air-recirculation optional accessory has been fitted and the extractor hood is to be operated without a flue duct, the cable must be wound onto the connector. Warning – Risk of injury! From sharp edges during installation.
- Page 24 *9001227077* 9001227077 990901...
Need help?
Do you have a question about the EXTRACTOR HOOD and is the answer not in the manual?
Questions and answers