Table of Contents
Advertisement
3.2.4
Connecting external sensors
WC flush actuation
NOTICE!
Damage to property due to excess voltage
If you apply voltage to the connection cable for the external
button, you will damage the control.
– Do not apply any external voltage!
Requirements:
Button with locking function or potential-free contact (closure time at
n
least 350 ms) available
Connection cable model 8355.90 available
n
Connect the contact to actuate the large flush volume between the
green (1) and white cable (2).
Strip the end of the brown cable (e.g., with a lustre terminal).
Connect the connection cable to the control.
Handling
31 from 42
Advertisement
Table of Contents
