Advertisement
Advertisement
Related Manuals for Wahl MULTI CUT PET CLIPPER
Summary of Contents for Wahl MULTI CUT PET CLIPPER
- Page 1 MULTI CUT PET CLIPPER INSTRUCTIONS...
-
Page 2: Table Of Contents
15. The blades on your clipper have fine teeth for precise cutting. Handle carefully when against the animals skin in order to avoid irritation. 16. When using any electrical appliance around animals, Wahl recommend the use of a circuit breaker to minimise risk. -
Page 3: Operating Instructions
Do not try to sharpen the clipper blades at home if they are dull. Special equipment is needed to re-sharpen the blades. It is equally important never to wash your blades in water. When the blades do not cut, they may need oiling or re-sharpening, you can return them to Wahl (UK) Ltd, Herne Bay Trade Park, Sea Street, Herne Bay Kent CT6 8JZ for the attention of Customer Services. - Page 4 ADJUSTABLE BLADE The convenient thumb adjustable multi cut lever found on most Wahl Pet Clippers (fig.16) provides for increased cutting variations with fewer blades. In the uppermost position, the cut is very fine and becomes gradually coarser as the lever is moved downward. The following chart illustrates the cutting range of each set of blades according to accepted pet industry grooming standards.
-
Page 5: Cleaning And Maintenance
6. Always replace the blade guard when the clipper is not in use. This will help prevent accidental damage and blade dulling. 7. Periodically, we recommend that you dip the teeth of the blade into a shallow pan of Wahl Clipper Oil (with the clipper running) to flush out dirt and hair. -
Page 6: Disposal
Fuse cover must be refitted when changing the fuse. If fuse cover is lost, the plug must not be used until a replacement is obtained. Information for obtaining the correct fuse is marked on the carrier itself and in the bottom of the fuse cavity in the plug. These may be obtained by Wahl UK Ltd NEITHER WIRE MUST BE CONNECTED TO THE EARTH TERMINAL OF A THREE-PIN PLUG.