Ninja Smart Screen FreshVac CT660UKV Instructions Manual page 8

VACUUM BLENDING
WITH YOUR FRESHVAC™ PITCHER - CONT.
IMPORTANT: Review all warnings
on pages 2-5 before proceeding.
TIPS:
• If the Stacked Blade Assembly is not
fully seated, you will not be able to
install and lock the lid.
• To learn more about the programs
that work with your Total Crushing
Pitcher, refer to page 9.
5 Place the pitcher on a level surface
and place the FreshVac™ Pump on
top of the green release seal on the
lid. The pump DOES NOT lock into
place on the lid.
IMPORTANT: Make sure the
FreshVac Tab is dry before using
FreshVac Pump.
12
6 To vacuum seal the pitcher, hold
the pump in place over the release
seal. Press the power button on top
of the pump once to begin vacuum
sealing. The pump will make a
motorised noise and the light on
the pod will illuminate in white while
vacuum sealing is in progress.
IMPORTANT: Overfilling the
pitcher may prevent the FreshVac
Pump from working properly.
7 When vacuum sealing is complete,
the pump will shut off automatically
and the green light on the pump
will illuminate.
8 To release the pump from the
pitcher, press the release button
located on the bottom front of
the pump.
9 To blend ingredients, follow
instructions on page 16. When
blending is complete, pressure
must be released from the pitcher
through the release seal before
opening the lid. See step 10 for
more information.
ninjakitchen.eu
13