System Monitoring - Lennox SunSource M215 Application Manuallines

SYSTEM MONITORING

Envoy Communications
Booster Furnished)
The Envoy Communications
microinverter (on solar modules) performance and can be
connected to a broadband internet connection to send data
to the Enphase Enlighten™ web site for online monitoring by
the homeowner. The Envoy Communications Gateway is
not required, but must be used if system performance
monitoring is desired. Limited system monitoring is also
available locally with the Envoy Communications Gateway
and a personal computer if no internet connection is
available.
Various Event Messages are also available when monitoring
the system via a personal computer locally.
Contents - (1) Envoy Communications Gateway, (1)
Communications Booster, (1) 6 ft. power cord, (1) 10 ft.
Ethernet cable, communications booster.
CSA (US/C) listed.
The Envoy Communications
Communications Booster which may or may not be needed
depending upon how far the Envoy is away from the solar
modules
Gateway (Communications
Gateway monitors
Gateway includes
Page 12
Communications Booster
Ethernet bridge signal
Communications Gateway. Booster is only needed if the
communications gateway is installed and signal is not strong
enough in the installed location. Allows the unit to be plugged
into an outlet closer to the distribution panel, yet still plug into
the broadband router.
Enphase Enlighten™ Performance Monitoring
Website
Powered by the Envoy Communications Gateway, the
Enphase Enlighten™ Performance Monitoring website
allows the homeowner to keep track of home energy usage
and see environmental benefits in real time.
a
See demos, view reference installations and other additional
information at: http://enlighten.enphaseenergy.com/
booster for the Envoy