Subscribe to Our Youtube Channel
Related Manuals for Lennox e-Lite LV-MO200
Summary of Contents for Lennox e-Lite LV-MO200
- Page 1 e-Lite DC INVERTER FREE | LV-MO200 > 260 Installation and Operation Manual LV-MO200-260-IOM- 20.04-E...
-
Page 3: Table Of Contents
CONTENTS PAGE CAUTION PRECAUTIONS.................1 Do not connect the Appliance from Main Power Supply directly. ATTACHED FITTINGS..............2 OUTDOOR UNIT INSTALLATION............3 WARNING INSTALL THE CONNECTING PIPE..........4 Ask an authorized dealer or qualified installation professional to ELECTRICAL WIRING..............9 install/maintain the air conditioner. Inappropriate installation may result in water leakage,electric shock TEST RUNNING................11 or fire. -
Page 4: Attached Fittings
An insufficient power supply capacity or inappropriate installation 6) Reamer may cause fire. 7) Gas leak detector Use the specified cables for wiring connect the terminals 8) Tape measure securely fix. To prevent external forces applied to the terminals 9) Thermometer from affecting the terminals. -
Page 5: Outdoor Unit Installation
The insulation of the metal parts of the building and the air conditioner should comply with the regulation of National Electric Standard. CAUTION When installing the outdoor unit in a place that is constantly exposed to a strong wind such as the upper stairs or rooftop of a Keep indoor unit, outdoor unit, power supply wiring and building, apply the windproof measures referring to the following transmission wiring at least 1 meter away from televisions... -
Page 6: Install The Connecting Pipe
4. INSTALL THE CONNECTING PIPE 3.3 Moving and installation Since the gravity center of the unit is not at its physical center, Check whether the height drop between the indoor unit and so please be careful when lifting it with a sling. outdoor unit, the length of refrigerant pipe, and the number of Never hold the inlet of the outdoor unit to prevent it from the bends meet the following requirements:... - Page 7 The second connect methond Check point of indoor unit Outdoor Unit(Take Model 260 for example) Check point of outdoor unit (45) intdoor Units Fig. 4-2 (45) (45) 4.3 Heat Insulation The first Line Branch Pipe (45) Do the heat insulation to the pipes of air side and liquid side separately.
- Page 8 Table 4-8 Branch header must be connected with indoor units directly, the further branch connection is not allowed. Capacity of Maximum Sum Capacity Outdoor Unit Outdoor unit Quantity of of Indoor unit (kW) (horsepower) Indoor unit (horsepower) Select branch joint 50%~130% Select the branch joint according to the total designed capacity of indoor units which it connects to.
- Page 9 The indoor unit below to the main pipe L3 are N3～N6, and its to- Indoor unit branch pipe tal capacity is 45×3+56=191, the size of pipe L3 isΦ19.1/Φ9.5, Inner branch pipes are a~f, the size selection please refers to and the branch pipe C should be FQZHN-01D. Table4-6.
- Page 10 The second cennect methond Outdoor unit Pipe Length(from the nearest branch pipe equivalent length Maximum pipe equivalent length (from the first line branch pipe) Maximum pipe equivalent length The first line Branch Pipe Indoor unit Fig.4-8 4.10 Refrigerant Amount to be Added 4.7 Remove Dirt or Water in the Piping Make sure there is no any dirt or water before connectiong Calculate the added refrigerant according to the diameter and the...
-
Page 11: Electrical Wiring
5. ELECTRICAL WIRING CAUTION ● Design a dedicated power supply for the indoor unit and outdoor unit. ● If the power supply uses a branch loop, install an electricity leakage protector and a manual switch. ● The power supply, electric leakage protectors, and manual switches of the indoor units that connect to the same outdoor unit must be universal. - Page 12 Outdoor unit P Q E Note: The parts in the dotted line box are optional.Contact the local distributor to purchase them if required. Use a shield cable and ground the shielding layer. Indoor unit Indoor unit Indoor unit Indoor unit P Q E P Q E P Q E...
-
Page 13: Test Running
Wrong connection may cause malfunction . NOTE Wiring Connection The wire diameter and continuous length is under the Seal the wiring connection with the insulation material , or the condition that the voltage vibration is within 2%. If the condensing dew will be caused. continuous length is exceed showing value, choose the wire diameter follow relevant regulation. -
Page 14: Precautions On Refrigerant Leakage
7. PRECAUTIONS ON REFRIGERANT LEAKAGE 7.1 Important information for the used refrigerant This air conditioner(A/C) adopts inncouous and nonflammable refrigerant. The locating room of the A/C should big engough This product has the fluorinated gas, it is forbidden to release to air. that any refrigerant leakage is unable to reach critical thickness. - Page 15 8.1 Information requirements for air-to-air conditioners Cooling mode: Information requirements for air-to-air conditioners Model(s): LV-MO200-I4M Test matching indoor units from 2, non-duct: 2×LV-C4(C)45-2DC + 2×LV-C4(C)56-2DC Outdoor side heat exchanger of air conditioner:air Indoor side heat exchanger of air conditioner:air Type:compressor driven If applicable:driver of compressor:electric motor Item Symbol...
- Page 16 Heating mode: Information requirements for air-to-air conditioners Model(s): LV-MO200-I4M Test matching indoor units from 2, non-duct: 2×LV-C4(C)45-2DC + 2×LV-C4(C)56-2DC Outdoor side heat exchanger of air conditioner:air Indoor side heat exchanger of air conditioner:air Idication if the heater is equipped with a supplementary heater:no If applicable:driver of compressor:electric motor Parameters shall be declared for the anerage heating season,parameters for the warmer and colder heating seasoms are optional Item...
- Page 17 Cooling mode: Information requirements for air-to-air conditioners Model(s): LV-MO224-I4M Test matching indoor units from 2, non-duct: 2×LV-C4(C)36-2DC + 2×LV-C4(C)71-2DC Outdoor side heat exchanger of air conditioner:air Indoor side heat exchanger of air conditioner:air Type:compressor driven If applicable:driver of compressor:electric motor Item Symbol Value...
- Page 18 Heating mode: Information requirements for air-to-air conditioners Model(s): LV-MO224-I4M Test matching indoor units from 2, non-duct: 2×LV-C4(C)36-2DC + 2×LV-C4(C)71-2DC Outdoor side heat exchanger of air conditioner:air Indoor side heat exchanger of air conditioner:air Idication if the heater is equipped with a supplementary heater:no If applicable:driver of compressor:electric motor Parameters shall be declared for the anerage heating season,parameters for the warmer and colder heating seasoms are optional Item...
- Page 19 Cooling mode: Information requirements for air-to-air conditioners Model(s): LV-MO260-I4M Test matching indoor units from 2, non-duct: 2×LV-C4(C)56-2DC + 2×LV-C4(C)71-2DC Outdoor side heat exchanger of air conditioner:air Indoor side heat exchanger of air conditioner:air Type:compressor driven If applicable:driver of compressor:electric motor Item Symbol Value...
- Page 20 Heating mode: Information requirements for air-to-air conditioners Model(s): LV-MO260-I4M Test matching indoor units from 2, non-duct: 2×LV-C4(C)56-2DC + 2×LV-C4(C)71-2DC Outdoor side heat exchanger of air conditioner:air Indoor side heat exchanger of air conditioner:air Idication if the heater is equipped with a supplementary heater:no If applicable:driver of compressor:electric motor Parameters shall be declared for the anerage heating season,parameters for the warmer and colder heating seasoms are optional Item...
- Page 24 Before using your air conditioner, please read this manual carefully and keep it for future reference. Due to LENNOX EMEA ongoing commitment to quality, the specifications, ratings and dimensions are subject to change without notice and without incurring liability. Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury.
Need help?
Do you have a question about the e-Lite LV-MO200 and is the answer not in the manual?
Questions and answers